RAS not using correct DHCP server info. Wrong subnet mask and gate

G

Guest

RAS server 2K pro.
When I try to connect to my RAS server, it's not giving the correct subnet
mask or gateway. RAS should be assigning IP via DHCP. RAS server is on
internal 172.***.***.*** and the DHCP server is on registered
206.***.***.***. I'm getting a address of 172.***.***.*** via RAS, but the
subnet mask is 255.255.255.255 and no default Gateway is given. Any ideas???

Thanks,
 
G

Guest

Think that's normal - mine's the same and works fine.

The only thing that looks strange is that your RAS has a private
172.xx.xx.xx ip address which is fine but where does the 206.xx.xx.xx come
into it? is this your external interface? I would have thought your DHCP
would have been on the Internal interface as well (assuming you have a 2 nic
setup) and hence on 172.xx.xx.xx That's the way I do it.

Rob
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Server 2008 RAS Only allowing clients to see local subnet 0
VPN and .192 subnet mask 2
Subnet Mask and RAS 2
PPP RAS Adapter 2
ras client not receiving ras server route table after connect 1
cannot list all the PCs in a subnet with RAS 3
RAS and DHCP 1
RAS Server giving out wrong gateway 5

Top