RAS I P address

S

Simon

Hi all,

I have RAS running on my DC which has an ip add of
192.168.1.200. RAS also creates a ip add. of
192.168.1.37. For some reason some of the client machines
recognise the RAS address as the official IP address and
this causes major speed issues and pressue on the server.
How can I stop these clients using this address without
turning off the RAS? Any ideas guys?

Regards,
Simon
 
R

Robert L [MS-MVP]

you may want to use ip pool instead of dhcp.

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
B

Bill Grant

You need to prevent the RAS interface registering in WINS and/or DNS. This
involves disabling Netbios over TCP/IP on the RAS interface to solve the
Netbt/WINS problem. Setting DNS to only listen on the LAN interface usually
solves the DNS problem. For more details see MD 289735 and 292822.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top