RAID disk size difference

  • Thread starter Thread starter Jason
  • Start date Start date
J

Jason

I recently set up a RAID 10 on my system, using four 500GB HDD's. It went
well, and the system sees it as a single 1TB drive, but windows Vista sees it
as a single 500GB drive. When I go into the device manager and look at the
RAID drive, windows sees it as a 1TB drive. Is there a way to get windows
explorer to see the drive for its true size, 1TB? I am afraid it will not
let me write past the 500GB's it thinks exists.
 
Were, in windows is it seen as 500gb?
Is this done via an onboard controler or an extension card controller?
& whose controler?
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Media steaming from two Hard drives one p.c. 0
Ghosting HD Software 1
Installation cancels becasue of system volume 1
Master Boot Record issue 11
RAID 0 or RAID 1 3
Help with setting up best storage configuration 0
Crucial MX200 0
Vista will not recognize an existing RAID 3

Back
Top