Question re: EIDE Harness

  • Thread starter Thread starter AA Smith
  • Start date Start date
A

AA Smith

I have need for an EIDE harness that has a longer than normal reach between
the one connector intended to plug into the system board and the two
connectors on the opposite end of the harness/cable. Do such harnesses
exist? If so, where might I find some? If not, is there some kind of
harness extension on the market? If so, where might I find some?

I shall greatly appreciate your help on this.
 
Thanks, Randy!

I will check out your suggestions. Actually, I need for the one connector
that's not on either end to be about 1" - 2" closer to the end it's closest
to. The two end connectors are sufficiently spaced apart to permit
connection to the system board and one of the EIDE devices that I need to
connect.
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

USB-front-port must be OVER-voltage - it FRIED my memory-drive 3
HDMI is a terrible format and I wish it never existed 2
New "Harness Tracking" project, help needed! 1
EIDE Cables 6
hopefully simple external drive question for some smart geek 8
Switching user 2
Replacing SCSI drive (boot) with EIDE drive 6
GAC, AssemblyResolve event, fusion.dll, Assembly.Load fails 1

Back
Top