problems with dualview

[Guest]

I’m currently running windows XP sp2, my mother board is an elitegroup
P4m800pro that has an integrated graphics port running Unichrome pro 3D/2d
graphics and video controller. I installed a NVIDIA GeForce2 MX/MX400 in to
the AGP slot. I can only get one to work at a time. I have upgraded all the
drivers. The motherboard, GeForce card and the IGP all say that they can
support multiple monitors. When I look in the hardware manager it tells me
that there is a code 10 error with the Unichrome driver. It seems like
windows can't or won’t recognize that there are two graphics ports and at no
time have I been able to see nor change the dualview setting. Please help I
have tried everything I can think of.

 

[thecreator]

Hi DaleB,

Your NVIDIA GeForce2 MX/MX400 card handles both displays. There should
be either two graphic ports on the card itself, or a wire supplied by NVIDIA
that attaches to the card where it splits and you see two VGA Connectors on
the wire.

You need to go into the Computer BIOS and disable the Onboard Graphics
port, when you installed an AGP Graphics Card. You can't have both active at
the same time, one or the other. If you want the Onboard Graphics active,
then you must remove the AGP Graphics Card from the computer.