Printing envelope - incorrect orientation - doesn't fit into feede

[Guest]

I set up my envelope from the download provided by one of your MVP's (so that
I can add our logo to our return address). But, when I print from the
envelope wizard, it allows me to feed the envelope through the manual feed in
the sideways mode. When I have the envelope in the document, it prints it as
a normal document and the envelope is too wide (the manual feeder won't take
it ).

Please help.. I've some so far and now I can't print the darn things

 

[Guest]

Have you looked in the printing options and checked the feed method? When
you are in the envelope/label dialog box, go to options and look at the
printing options tab. There are several ways you can feed the envelope into
your printer.

 

[Graham Mayor]

It may have been my envelope template, which was originally set up for an
Epson printer which allowed printing in the 'widthways' mode. You will need
to change the page orientation to landscape and the check the paper size is
Envelope #10 which your printer driver should then interpret correctly. I
found the same problem when I bought a new printer recently.

See also http://www.gmayor.com/Alternative_Return_Addresses.htm

--
<>>< ><<> ><<> <>>< ><<> <>>< <>><<>
Graham Mayor - Word MVP

My web site www.gmayor.com

<>>< ><<> ><<> <>>< ><<> <>>< <>><<>