peer to peer Windows XP to Windows 98

[Rick Antle]

I am trying to network two computer together at the
office to share files. One computer has Windows XP and
the other has Windows 98. They both have working network
cards and network cable connected to a hub. I followed
the instruction from the connection wizzard on the
Windows XP system. The XP system promped me to make a
setup disk for the Windows 98 system. I followed the
instructions from the setup disk on the Windows 98
system. They are both in the same workgroup. The wizzard
said that the network setup was successful on both
systems. However, I can't see the other computer from
either system. What am i doing wrong?

 

[Nico Tomacelli [MSFT]]

Hi Rick,

Have you checked to make sure the Internet Connection Firewall is not turned
on in XP?

Below is information by Steve Winograd, Microsoft MVP.
It provides excellent information for configuring a home networking with
Windows XP.

1. Permanently disable XP's built-in Internet Connection Firewall on
local area network connections -- it's for use only on a direct modem
connection to the Internet. Disable and un-install all other
firewalls while troubleshooting. Details here:

Windows XP Internet Connection Firewall
http://www.practicallynetworked.com/sharing/xp/ic_firewall.htm

2. Use only one protocol for File and Printer Sharing. If the network
needs more than one protocol, unbind File and Printer Sharing from all
but one of them. Details here:

Windows XP Network Protocols
http://www.practicallynetworked.com/sharing/xp/network_protocols.htm

3. Make sure that NetBIOS over TCP/IP is enabled on all computers.
Details here:

Enable NetBIOS Over TCP/IP (NetBT)
http://www.practicallynetworked.com/sharing/troubleshoot/netbt.htm

4. Run "ipconfig /all" on XP and look at the "Node Type" at the
beginning of the output. If it says "Peer-to-Peer" (which should
actually be "Point-to-Point") that's the problem. It means that the
computer only uses a WINS server, which isn't available on a
peer-to-peer network for NetBIOS name resolution.

If that's the case, run the registry editor, open this key:

HLM\System\CurrentControlSet\Services\Netbt\Parameters

and delete these values if they're present:

NodeType
DhcpNodeType

Reboot, then try network access again.

If that doesn't fix it, open that registry key again, create a DWORD
value called "NodeType", and set it to 1 for "Broadcast" or 4 for
"Mixed".

For details, see these Microsoft Knowledge Base articles:

Default Node Type for Microsoft Clients
http://support.microsoft.com/default.aspx?scid=kb;en-us;160177

TCP/IP and NBT Configuration Parameters for Windows XP
http://support.microsoft.com/default.aspx?scid=kb;en-us;314053


Thanks.
Nico Tomacelli
Microsoft Corp.
US - Windows Core:SOLID

This posting is provided "AS IS" with no warranties, and confers no rights.
=====================================================
When responding to posts, please "Reply to Group" via your newsreader
so that others may learn and benefit from your issue.
=====================================================

Please check out the following information provided by Steve Winograd,
Microsoft MVP. It provides excellent information for configuring a home
networking with Windows XP.

1. Permanently disable XP's built-in Internet Connection Firewall on
local area network connections -- it's for use only on a direct modem
connection to the Internet. Disable and un-install all other
firewalls while troubleshooting. Details here:

Windows XP Internet Connection Firewall
http://www.practicallynetworked.com/sharing/xp/ic_firewall.htm

2. Use only one protocol for File and Printer Sharing. If the network
needs more than one protocol, unbind File and Printer Sharing from all
but one of them. Details here:

Windows XP Network Protocols
http://www.practicallynetworked.com/sharing/xp/network_protocols.htm

3. Make sure that NetBIOS over TCP/IP is enabled on all computers.
Details here:

Enable NetBIOS Over TCP/IP (NetBT)
http://www.practicallynetworked.com/sharing/troubleshoot/netbt.htm

4. Run "ipconfig /all" on XP and look at the "Node Type" at the
beginning of the output. If it says "Peer-to-Peer" (which should
actually be "Point-to-Point") that's the problem. It means that the
computer only uses a WINS server, which isn't available on a
peer-to-peer network for NetBIOS name resolution.

If that's the case, run the registry editor, open this key:

HLM\System\CurrentControlSet\Services\Netbt\Parameters

and delete these values if they're present:

NodeType
DhcpNodeType

Reboot, then try network access again.

If that doesn't fix it, open that registry key again, create a DWORD
value called "NodeType", and set it to 1 for "Broadcast" or 4 for
"Mixed".

For details, see these Microsoft Knowledge Base articles:

Default Node Type for Microsoft Clients
http://support.microsoft.com/default.aspx?scid=kb;en-us;160177

TCP/IP and NBT Configuration Parameters for Windows XP
http://support.microsoft.com/default.aspx?scid=kb;en-us;314053


Thanks.
Nico Tomacelli
Microsoft Corp.
US - Windows Core:SOLID

This posting is provided "AS IS" with no warranties, and confers no rights.
=====================================================
When responding to posts, please "Reply to Group" via your newsreader
so that others may learn and benefit from your issue.
=====================================================