Page cannot be displayed

[Nipun]

Hello,

Could any of you please help me with this problem:

1. I have a Personal webserver running https (443)on NT 4.0
2. From client PCs I can connect to the website without
any problems
3. But after I exit from the web site hosted on the web
server, and login again later it shows me error 'Page
cannot be displayed'

'Ping <server ip address>' & 'telnet <server ip address>
443' works fine.

What can I check ? What could be wrong ?

 

[H Leboeuf]

Can this be the fix?

The AutoDial Procedure Stops If You Quit Internet Explorer
When Internet Explorer performs an AutoDial procedure, the Internet Explorer
window and the Dial-Up Connection dialog box are displayed. If you configure
the AutoDial feature to automatically connect, the AutoDial procedure
starts. When this occurs, you can quit Internet Explorer. If you do this,
the Dial-Up Connection dialog box closes. Because the connection is not
established, the modem dials, negotiates line speed, and then stays
connected until an Internet service provider (ISP) timeout occurs and quits
the connection.
http://support.microsoft.com/?kbid=309178 (i. e. 6. NT4/XP/W2000 11/14/2003)
--

Henri Leboeuf
Web page: http://www.colba.net/~hlebo49/index.htm
** NOTE NEW ADDRESS **
Pages at generation.net will no longer be updated.
===