P4P800 deluxe RAID IDE problem

  • Thread starter Thread starter Henri Haverhals
  • Start date Start date
H

Henri Haverhals

I want to setup een IDE RAID 0 array and have connected two
IDE drives to the RAID connectors.
The manuel states that you have to push (tab) during POST and
than you will get the VIA RAID utility. I tried everything but
I don't get into de utility. What am I doning wrong.

Henri
 
On Sun, 25 Jan 2004 16:38:30 +0100, "Henri Haverhals"

Make sure you have the RAID controller turned on in BIOS.
Once thats done, when you boot, will go thru POST then after that, you
will get the screen with the RAID info and gives you the chance to use
TAB to configure your RAID config.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

P4P800-E Deluxe...which IDE connectors can I use 1
Newbie P4P800 Deluxe Raid 7
PATA RAID on a K8V SE Deluxe? 1
P4P800 Deluxe and Via Raid Controller 1
P4P800-E Dlx IDE/SATA question? 10
XP wanting to install on the SATA Raid not the IDE Raid on a P4C800-E Deluxe 1
P4P800 - SATA vs. IDE Raid 0/1 14
Question on IDE RAID 1 4

Back
Top