P2B-DS - SATA RAID & Hitachi 250Gb hard drives

L

Ludovic

Hello,

does someone know if 2 Hitachi 7k250 hard drives (250Gb) in Raid 1 on
a Promise Fasttrack 150 TX2+ can run on an Asus P2BDS rev 1.04 with
the latest bios ?

Do I need to choose SCSI in the bios in order to boot to SATA ?

Best regards

Ludovic
 
P

P2B

Ludovic said:
Hello,

does someone know if 2 Hitachi 7k250 hard drives (250Gb) in Raid 1 on
a Promise Fasttrack 150 TX2+ can run on an Asus P2BDS rev 1.04 with
the latest bios ?

I haven't tried it, but I don't see any reason it wouldn't work -
provided the BIOS sees the Promise card.
Do I need to choose SCSI in the bios in order to boot to SATA ?

If there's a bootable IDE drive attached, yes - otherwise it shouldn't
matter. If there's a bootable SCSI drive attached, you'll probably need
to disable the SCSI BIOS in order to boot from SATA.

HTH

P2B
 
L

Ludovic AUDOIN

Ok, thanks for your help. I think I identified my problem. I can install
XP by hitting F5 during the boot in "standard PC" but if I do this in
acpi or smp it freezes. Does somebody have an idea ?

Best regards
 
L

Ludovic AUDOIN

Ok, thanks for your help. I think I identified my problem. I can install
XP by hitting F5 during the boot in "standard PC" but if I do this in
acpi or smp it freezes. Does somebody have an idea ?

Best regards

Ludovic
 
P

P2B

Ludovic said:
Ok, thanks for your help. I think I identified my problem. I can install
XP by hitting F5 during the boot in "standard PC" but if I do this in
acpi or smp it freezes. Does somebody have an idea ?

This symptom frequently indicates incompatibility between the
motherboard and disk controller BIOSes, and may not be solvable.

You can try changing options for MPS version and power management in the
motherboard BIOS (some combination may work), controller BIOS update if
available etc.

HTH

P2B
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top