Out of range line disappears in print as it re-enters graph

N

Nisse PowerMan

Hello, I have a problem with "Out of range line disappears in print as
it re-enters graph"

Here is what I did:

I measured RF power and made a graph. After initial settling I switch
off power, then after some time switch on. I measure and make a graph
(plot).

In order to get a good view of the settling I must zoom into the
interesting area. The signal (line) goes outside my graph and re-enters.
On the screen everything looks perfect.

As I print the line LEAVING the graph prints but the line RE-ENTERING
the graph do not print.

The line start printing after the first data point in my graph.

Is there i method to fix the printing?

/Nisse
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

How do I leave out blank cells in a line graph? 1
Need to "not show" piece of line in graph 5
Dynamic Range with unused formula messing up x axis on dynamic graph 2
How to draw a graph with the X axis as a time line of date. 4
Excel macro to connect points as line on graph 0
Chart creation ceiling in Excel 2002 via Chart.Add ? 3
Graph from MySQL does not print, although it looks fine in the browser 1
2709 point limit in Excel 2007 scatter plot 3

Top