NTFS and FAT32 on same drive?

W

Wayne King

Can I create a NTFS partition and a FAT32 partition on the same hard-drive?

I want to have XP and my old windows 98 on one drive as I have a one or two
hardware that I can't get the drivers for XP.
 
R

Robert Moir

Wayne said:
Can I create a NTFS partition and a FAT32 partition on the same
hard-drive?

Yes sure.
I want to have XP and my old windows 98 on one drive as I have a one
or two hardware that I can't get the drivers for XP.

Seems reasonable. I think you'll find the FAT32 partition needs to be the
first partition but its so long since I played with Win 98 I can't swear to
it.
 
B

Bruce Chambers

Greetings --

Yes, certainly.

WinXP can read FAT12 (the file system used on 3.5" diskettes),
FAT16, FAT32, CDFS (the file system used on most CDs), and NTFS with
equal facility. Further, the file system on any one disk/partition or
diskette has absolutely no affect upon the operating system's ability
to read other compatible file systems on other disks/partitions.

The simplest way I've found to dual boot between Win9x and WinXP
would be to partition your drive(s) roughly as follows:

C: Primary FAT32 Win9x/Legacy Apps
D: Extended NTFS WinXP/Modern Apps

Adjust the partition sizes according to your actual hard drive(s)
size and the amount of space you'd like to allocate to each OS and its
applications.

Create the partitions using Win9x's FDISK so you can enable large
disk support (FAT32). (No need for 3rd party partitioning
utilities/boot managers and their frequent complications.)

Install Win9x first, being sure to select "C:\Windows" (or
D:\Windows, if you prefer) when asked for the default Windows
directory. When you subsequently install WinXP, be sure to specify
"D:\Winnt" (or "D:\Windows," "C:\Winnt" as referred/applicable) when
asked for the default Windows directory, to place it in the other
partition. The WinXP installation routine will automatically set up a
Multi-boot menu for you. The default settings for this menu can be
readily edited from within WinXP. NOTE: If you elect to place Win98
on the "D:" drive, you'll _have_ to leave the "C:" drive as FAT32.

This method can be adapted to using 2 physical hard drives by
placing the boot partition (C:, which still must be FAT32) and either
of the operating systems on the Primary Master hard drive, and the
second operating system on the second hard drive.

It is also possible to have a 3rd partition for shared
applications, but it would be necessary for such a partition to be
formatted in the common file format (FAT32). The applications would
also have to be installed into each OS (to ensure proper system file
placement and registry updates), one at a time, but the bulk of the
program files could be located on this common partition. I do not,
however, actually recommend doing this as, if you were to uninstall
such an application from one OS, you may not be able to gracefully
uninstall it from the second OS, having already deleted crucial
installation data during the first uninstall action.

Just about everything you need to know (URLs may wrap):

http://support.microsoft.com/support/kb/articles/Q217/2/10.ASP

http://www.microsoft.com/windowsxp/pro/using/howto/gettingstarted/multiboot.asp


Bruce Chambers

--
Help us help you:




You can have peace. Or you can have freedom. Don't ever count on
having both at once. -- RAH
 
W

Wayne King

Thanks to both of you.

Very thorough and informative. Just the answer I was hopping for.

I've an 80Gb drive and just want a 5Gb partition or so for windows 98 so I
can run the hardware when I need them.

Thanks again. :)
 
B

Bruce Chambers

Greetings --

You're welcome.

Bruce Chambers

--
Help us help you:




You can have peace. Or you can have freedom. Don't ever count on
having both at once. -- RAH
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top