new mainboard

H

horst

I am going to change my old mainboard with a Celeron to a new one with a
dual core CPU.
Could please somebody tell me what is the best procedure to uninstall
the old drivers and install the new ones?
Which drivers should be un- and reinstalled?
Is there some web site explaining how to proceed?
Thanks
Horst
 
M

Malke

horst said:
I am going to change my old mainboard with a Celeron to a new one with a
dual core CPU.
Could please somebody tell me what is the best procedure to uninstall
the old drivers and install the new ones?
Which drivers should be un- and reinstalled?
Is there some web site explaining how to proceed?

This may help:

http://www.michaelstevenstech.com/moving_xp.html - for changing motherboard
http://www.michaelstevenstech.com/XPrepairinstall.htm - Repair Install
How-To

Malke
 
B

Bruce Chambers

horst said:
I am going to change my old mainboard with a Celeron to a new one with a
dual core CPU.
Could please somebody tell me what is the best procedure to uninstall
the old drivers and install the new ones?
Which drivers should be un- and reinstalled?
Is there some web site explaining how to proceed?
Thanks
Horst


Normally, and assuming a retail license (many factory-installed OEM
installations are BIOS-locked to a specific motherboard chipset and
therefore are *not* transferable to a new motherboard - check yours
before starting), unless the new motherboard is virtually identical
(same chipset, same IDE controllers, same BIOS version, etc.) to the one
on which the WinXP installation was originally performed, you'll need to
perform a repair (a.k.a. in-place upgrade) installation, at the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

Changing a Motherboard or Moving a Hard Drive with WinXP Installed
http://www.michaelstevenstech.com/moving_xp.html

The "why" is quite simple, really, and has nothing to do with
licensing issues, per se; it's a purely technical matter, at this point.
You've pulled the proverbial hardware rug out from under the OS. (If
you don't like -- or get -- the rug analogy, think of it as picking up a
Cape Cod style home and then setting it down onto a Ranch style
foundation. It just isn't going to fit.) WinXP, like Win2K before it,
is not nearly as "promiscuous" as Win9x when it comes to accepting any
old hardware configuration you throw at it. On installation it
"tailors" itself to the specific hardware found. This is one of the
reasons that the entire WinNT/2K/XP OS family is so much more stable
than the Win9x group.

As always when undertaking such a significant change, back up any
important data before starting.

This will also probably require re-activation, unless you have a
Volume Licensed version of WinXP Pro installed. If it's been more than
120 days since you last activated that specific Product Key, you'll most
likely be able to activate via the Internet without problem. If it's
been less, you might have to make a 5 minute phone call.


--

Bruce Chambers

Help us help you:


http://support.microsoft.com/default.aspx/kb/555375

They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety. ~Benjamin Franklin

Many people would rather die than think; in fact, most do. ~Bertrand Russell

The philosopher has never killed any priests, whereas the priest has
killed a great many philosophers.
~ Denis Diderot
 
L

Lil' Dave

horst said:
I am going to change my old mainboard with a Celeron to a new one with a
dual core CPU.
Could please somebody tell me what is the best procedure to uninstall the
old drivers and install the new ones?
Which drivers should be un- and reinstalled?
Is there some web site explaining how to proceed?
Thanks
Horst

Uninstalling the motherboard drivers was common in such a motherboard swap
in some other versions of the windows operatiing system, not XP.

Any additional hardware drivers needed that you had to manually install,
should be uninstalled. Whether via device manager or uninstalling the
complete printer software package, and various other methods is not the
issue. Just to uininstall it. THEN, use the repair option of the XP
install CD mentioned by others. Then reinstall within the XP environment
said drivers by whatever method they were applied previously. This may save
you some heartache.
--
Dave

Similarities between Enron originated money crisis
and todays current economical crisis.
Same banks too big to fail that invested in Enron then and bad mortgages of
today.
The mindset of Enron keeping its false books, and the mindset of todays' bad
mortgage balance sheets before all was exposed.
Lack of conscience then and now.
President G. W. Bush
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top