New Hard Drive

[Richie NY]

Last evening I posted an issue whereas I installed a hard
drive successfully, but it will not show up in "My
Computer". Aside from just totally uninstalling it and
starting over, I'm still looking for a solution to this
problem.

Cheers to the person with the solution, I'm baffled.

Currently the settings are as follows:
Main drive jumper as Master
Secondary drive as Slave

Motherboard is CSEL capable

 

[Rich Barry]

Richie, rt click on MyComputer>select Manage>Disk Management. See if the
drive shows up there. If yes, rt click and assign a drive letter to it. If
no, try moving the drive to the Secondary Ide channel as Master.

 

[Glenn]

Last evening I posted an issue whereas I installed a hard
drive successfully, but it will not show up in "My
Computer". Aside from just totally uninstalling it and
starting over, I'm still looking for a solution to this
problem.

Cheers to the person with the solution, I'm baffled.

Currently the settings are as follows:
Main drive jumper as Master
Secondary drive as Slave

Motherboard is CSEL capable

If your motherboard supports cable select then just reset the jumpers to
csel & place the drives in the order you wish & this hopefully should
solve your problem
Glenn

--
"*-344-*Never Forgotten"
Is for the New York City Firemen who lost their lives on September 11,2001.
The official count is 343, but there was also a volunteer who lost his life
aiding in the initial rescue efforts. And I will never forget them as
long as I live,
nor should any American.
"Mow Green"

 

[Les Herrman]

Last evening I posted an issue whereas I installed a hard
drive successfully, but it will not show up in "My
Computer". Aside from just totally uninstalling it and
starting over, I'm still looking for a solution to this
problem.

Cheers to the person with the solution, I'm baffled.

Currently the settings are as follows:
Main drive jumper as Master
Secondary drive as Slave

Motherboard is CSEL capable

Did you fdisk and format the drive?

It wont show up in My Computer until this is done.

Open Admin tools
Go to Computer Management
Then Disk Management

The drive should show there.

Initialize it and format it from there.