Network Bridge

S

Steven Do

I have an embedded board with 2 ethernet ports. Both port have the
appropriate class C IP address and are addressable on the network. When I
try to bridge them I get the message "An unexpected error occured while
configuring the Network Bridge". I have also checked the event log and did
not find anything there that could help me to troubleshoot. I have the
following components installed with service pack 1:

Local Network Bridge
Mac Bridge Minipot
+ all dependencies from Auto resolve.


Thanks,

Steve
 
H

Heidi Linda

Ta.exe or tap.exe? tap.exe is generally found to be a lot
more reliable...it could be a software dependency, in
which case the vampire.slx on xpefiles.com might be of use
to you.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Error creating bridge 3
Local network bridge 3
Bridging network 1
Local Network Bridge 1
Adding Local Network Bridge and Connection Manager Runtime Components 1
netsh bridge issue 2
Scripting network setup 1
Network bridge problem 9

Top