Network and home web server

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Good morning

I have a home pc running Windows XP home and I have until recently been
using a US Robotics router to create a home network. Basically I have the
main pc wired into the router and the subsequent computers connecting
wirelessly. I then had the bright idea of setting up my own web server using
DynDNS and Apache. This has knocked out all connectivity through the router.
I have now removed DynDNS and Apache but still cannot connect throuigh the
router.

I have also tried another router and the same problems seems to occur (which
leads me to this being a Windows XP networking issue rather than a hardware
one). As a note I can connect to the web when I plug the cable from my modem
directly into the NIC buit if I go through the ruter it will not connect.

Can anyone help with this issue or perhaps point me in the right direction
to getting this solved.

Any help would be much appreciated.

Thanks

Mark
 
Hi
Do you have LAN connections between the computers when they are connected to
the Router's Switch?
If you do it is probably Authentication problem. I.e the Router lost the
capacity to log to the ISP, probably need MAC cloning,
http://www.ezlan.net/broadband.html
Jack (MVP-Networking).
 
Back
Top