My gateway PC

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hi freinds; I went to BIOS to check the status of my two hard disk( C& E).
They are both set as primary disks. The DVD-CD Rom is set as secondary . So I
tried to make canges but when I tried to boot PC it shows this message:
PXE-E53: No boot filenames received

PXE-MOF: Exiting Intel PXE Rom.
Boot Failure: System Halted

Is somebody knows how to get it back to normal?

Thanks Very: Gabriel
 
Go back into the BIOS and undo what you did. If that doesnot work go
into the BIOS and reset it to the default settings. If that doesnot
work discharge the BIOS (CMOS) , this may involve removing the CMOS
battery or changing a jumper setting or a combination of both - look it
up in your motherboard manual.

If you changed the jumpers settings on the actual devices put them back
where they were.
 
You have either changed the boot devices, the boot order, or both. The
PXE error messages are referring to the BIOS trying to boot from the
network. One way or another, you have removed your hard disk drives
from the boot options.

Go back into the BIOS, make sure you have the hard disks set up as boot
options.
 
Back
Top