Multiplication problem- Please Help!

[millzenator]

Hello all. I am a novice Excel user, and cannot seem to locate the
source of my problem. Please help!


Here is my sheet:


C4 D4
E4 F4 G4 H4

9/22/2005 7:10 PM___10/1/2005 12:13 PM___ 8.7__52.6__6.0__317.64

Start date is entered into C4.
End date is entered into D4.

The following formula is in E4 to determine elapsed days:

=IF(D4=0,"",IF(C4=0,"",(IF(ISERROR((D4-C4)*24),"",(D4-C4)*24)/24)))

F4 contains "FLAGED HOURS" (for a body shop estimate)

G4 contains a value used for "cycle time" and is using the following
formula:

=IF(F4=0,"",F4/E4)

H4 contains a simple multiplication formula: =(F4*G4), but returns
317.64 INSTEAD of 315.6 (which is 52.6 x 6.0). I need the 315.6 result
in H4.

Would someone please tell me what I am doing wrong????

Thanks very much!

 

[Bob Phillips]

The cells contain trailing digits which you are not seeing.

You could try

=(ROUND(F4,2)*(ROUND(G4,1)))

--
HTH

Bob Phillips

"millzenator" <[email protected]>
wrote in message
news:[email protected]...

 

[LGW]

This appears to be a rounding problem....Try changing the foemula in H:
to =F4*ROUND(G4,0

 

[millzenator]

Well, I need more help on these sheets. I've made two attachments (
wish I could figure out how to imbed an image directly into the messag
here...)

On sheet 1, this is the code to figure the required date for a cycl
time. This is from column F-

=IF(C3=0,"",C3+(D3/E3))


This is the code from column G, that tells me how many days between
and F-

=IF(F3=0,"",IF(C3=0,"",(IF(ISERROR((F3-C3)*24),"",(F3-C3)*24)/24)))

I need the formula to exclude Saturdays and Sundays. Is this possible
If possible, it would be great to have it display " x days x hours
instead of "5.8" days.

On sheet 3, I am using the same code-

=IF(D3=0,"",IF(C3=0,"",(IF(ISERROR((D3-C3)*24),"",(D3-C3)*24)/24)))

...to tell me how many elapsed days between C and D, and still need th
same fix, as above.

Please help

+-------------------------------------------------------------------
|Filename: sheet3.jpg
|Download: http://www.excelforum.com/attachment.php?postid=4700
+-------------------------------------------------------------------

 

[Guest]

Try using Excel formula: =networkdays(start date,end date). You can even
exclude holidays using this formula. First, though, you have to go to Tools,
Add-Ins... and select the Analysis ToolPak. Takes about two seconds to do.
The Analysis ToolPak give you a choice of lots more formulas.

 

[millzenator]

I've tried incorporating the NETWORKDAYS function into the current
formulas, but can't get it to work. Playing with NETWORKDAYS on a
blank sheet, it rounds to the day. I need results to the hour. Any
further help, or examples using my formulas?

Thanks!

Terry

 

[daddylonglegs]

Can I confirm what you want to do?

Do you want to calculate the number of days and hours between tw
date/times (excluding weekends) or do you want to generate a date/tim
based on a number of days (possibly fractional) added to a star
date/time? (or both )

If the latter then how many hours constitute a day? If you add 1.2 day
to 18:00 on a Monday what should the result be? Do you want the tim
returned to be any time of the day or should it be within specifi
hours, e.g. your working hours, if so what are these

 

[daddylonglegs]

Looking at your sheet1 looks like you want to add the number of days in
G3 (5.8) to the date in C3, excluding weekends, If any time on a
working day is acceptable perhaps

=WORKDAY(C3,G3+MOD(C3,1))+MOD(C3+G3,1)

although, depending on your answers to my questions above, you might
need a more complex formula.....

 

[millzenator]

Thanks for the help so far guys... I am by no means an expert at Excel
and am only trying to help a friend who owns a body shop. Believe me
he is not guru at computers, but can bring a car back to life Chri
Foose.

Basically, Progressive Insurance requires that their jobs be complete
within a certain "cycle time", based on when the car arrives at th
shop and when the repairs are completed. A cycle time of 4.0 or 4.5 i
acceptable, but anything below that, and Progressive starts to limit th
number of vehicles that are brought to my friends shop for repairs. Hi
business is new, and I am doing all that I can to help him get started.

I created one sheet where you input a start date and time and an en
date and time. This sheet calculates the cycle time based on "fla
hours (the number of hours Progressive estimates that the repairs wil
take)".

I created another sheet where you input a start date and time, desire
cycle time, and it will tell you when the vehicle is due to maintai
the cycle time that you input in the cell.

What I need is to exclude weekend days, and the work hours for the wee
can include all 24 hours of each day. I only need to exclude weeken
days if they fall into the date ranges that are manually added.

I did find this VB code on the net, but I have no idea how to use it:

'**************************************
'Windows API/Global Declarations for :Ne
' tWorkDays
'**************************************
-
'**************************************
' Name: NetWorkDays
' Description:The code is capable of cal
' culating the NETWORK DAYS LIKE it does i
' n excel.
The Weekends gets removed and the days betwwen the 2 dates is th
output in days
' By: Brijesh
'
'
' Inputs:this is the function call
checkAvailableDays = dayscalculation(CalculationStartDate
WPAEmpEndDate)
'
' Returns:Returns days excluding weekday
' s.
Holidays are included....working on a code to remove that
'
'Assumes:-
'
'Side Effects:I dont see any except for
' the error handling which can be customis
' ed
'This code is copyrighted and has limite
' d warranties.
'Please see http://www.Planet-Source-Cod
' e.com/xq/ASP/txtCodeId.64390/lngWId.1/qx
' /vb/scripts/ShowCode.htm
'for details.
'**************************************

'call to the function
dim checkAvailableDays as integer
checkAvailableDays = dayscalculation(CalculationStartDate
WPAEmpEndDate)
'---Amazing this code actially works


Private Function dayscalculation(CalculationStartDate As Date
WPAEmpEndDate As Date)
Dim workingdays As Integer
StDateValue = CDate(CalculationStartDate)
EndDateValue = CDate(WPAEmpEndDate)
If (StDateValue > EndDateValue) Then
MsgBox "Sorry Invalid Date Value", vbCritical, "VOID"
workingdays = 0
Else
If (StDateValue = EndDateValue) Then
MsgBox "Sorry Dates are Same", vbCritical, "VOID"
workingdays = 0
Else
workingdays = DateDiffW(StDateValue, EndDateValue)
End If
End If
dayscalculation = workingdays
End Function


Private Function DateDiffW(StDateValue, EndDateValue)
For i = StDateValue To EndDateValue
If (Weekday(i) <> 1) And (Weekday(i) <> 7) Then
WorkingDaysValue = WorkingDaysValue + 1
End If
Next
DateDiffW = WorkingDaysValue
End Function

If you guys are will to help, I can email my small Excel files to yo
for your expert diagnosis :