Motherboard stuck in case

  • Thread starter Thread starter Mouse Anony
  • Start date Start date
M

Mouse Anony

Help

My motherboard is stuck in my case. One of the screwes refuses to come
out. I've tried everything i can think of like lubricating it, pushing
it from the other side and other stuff but it just won't come out. It
keeps turning and turning. it doesn't have a spacer as it's a raised
hole. wtf should i do????????????
 
Mouse Anony said:
Help

My motherboard is stuck in my case. One of the screwes refuses to come
out. I've tried everything i can think of like lubricating it, pushing
it from the other side and other stuff but it just won't come out. It
keeps turning and turning. it doesn't have a spacer as it's a raised
hole. wtf should i do????????????
Click to expand...

It's probably stripped. So you have to continue turning it, while prying it
upward at the same time. To pry, you can use a very skinny screwdriver, or
even a safety razor to get under the head of the screw.
 
Help

My motherboard is stuck in my case. One of the screwes refuses to come
out. I've tried everything i can think of like lubricating it, pushing
it from the other side and other stuff but it just won't come out. It
keeps turning and turning. it doesn't have a spacer as it's a raised
hole. wtf should i do????????????
Click to expand...

Carefully, and I do mean carefully(!), lift up on the motherboard (assuming
it's the last screw to come out) while turning the screw to loosen. This
will give you upward pressure on the screw and allow it to back out.



--
Big Daddy Ruel Smith

My SuSE Linux machine uptime:
11:09am up 7 days 1:44, 2 users, load average: 0.01, 0.19, 0.28

My Windows XP machine uptime:
Something less...
 
Mouse said:
Help

My motherboard is stuck in my case. One of the screwes refuses to come
out. I've tried everything i can think of like lubricating it, pushing
it from the other side and other stuff but it just won't come out. It
keeps turning and turning. it doesn't have a spacer as it's a raised
hole. wtf should i do????????????
Click to expand...

If you can grip it with needlenose pliers you can apply some upward
pressure as you turn it and that might get it. You may have to drill it
out but you would have to be very careful not to damage the board. I've
drilled out plenty of screws but never on a part that delicate. It could
be done with a lot of patience and a delicate touch though.
 
Mouse said:
Help

My motherboard is stuck in my case. One of the screwes refuses to come
out. I've tried everything i can think of like lubricating it, pushing
it from the other side and other stuff but it just won't come out. It
keeps turning and turning. it doesn't have a spacer as it's a raised
hole. wtf should i do????????????
Click to expand...

Push it from the other side while turning.

Are you turning it the right way? Righty tighty; lefty loosey.
 
Back
Top