Missing record selector

  • Thread starter Thread starter Linda Edlund
  • Start date Start date
L

Linda Edlund

Property for the form's record selector is set to "YES" and the record
selector is still missing - why?

thanks in advance
Linda
 
Just to be sure, because some people get confused on this issue; you are
talking about the Record Selector, not the Navigation Buttons?

Linda said:
Property for the form's record selector is set to "YES" and the record
selector is still missing - why?

thanks in advance
Linda
Click to expand...

--
There's ALWAYS more than one way to skin a cat!

Answers/posts based on Access 2000

Message posted via AccessMonster.com
 
Just to be sure, because some people get confused on this issue; you are
talking about the Record Selector, not the Navigation Buttons?
Click to expand...

Yes, positive. We are talking about record selector (in the left side of
the form). But now it seems not to be the only problem. After a few changes
in the form's layout, one of the text fields (calculating) has disappeared.
Well not exactly disappeared - it's not visible. When it gets focus, you
can see it and it works like intend, but when loss focus the field
disappear again… weird (I can add, that there's not en issue of <send
back or forward> I check it already)
 
Hi LInda,
At this point I think I'd try a /decompile.
http://www.granite.ab.ca/access/decompile.htm

Linda said:
Just to be sure, because some people get confused on this issue; you are
talking about the Record Selector, not the Navigation Buttons?
Click to expand...
[quoted text clipped - 4 lines]
Yes, positive. We are talking about record selector (in the left side of
the form). But now it seems not to be the only problem. After a few changes
in the form's layout, one of the text fields (calculating) has disappeared.
Well not exactly disappeared - it's not visible. When it gets focus, you
can see it and it works like intend, but when loss focus the field
disappear again… weird (I can add, that there's not en issue of <send
back or forward> I check it already)
Click to expand...
 
Hi Linda:

A bit of a long shot here... I don't know about the record selector, but are
you using "Windows Themed Controls On Forms"? (It's a setting available
under Options>Forms.). I had a problem just like you describe (with controls
disappearing except when they had the focus) and themed controls were the
problem. Experiment with turning them off..

HTH
Fred Boer
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Custom Record Selector Controls that don't work like the built-inones 1
Determine If Record Selector is selected 9
Width of record selector in datasheets 3
Using one command button to open one of two forms 3
Using check box to make record active 3
Using Record Selectors 1
Using Record Selectors 2
RQuestion on Form Record Selector Bar 1

Back
Top