Mail sent through IIS virtual SMTP server not arriving

A

antonyliu2002

As a follow-up, I did Start>Run>eventvwr.msc, and clicked System.

I got a whole bunch of Warnings from source SMTPSVC like so:

Type Date Time Source Category Event User Computer
Warning 3/3/2006 3:02:13PM SMTPSVC None 4000 N/A jzgwxp
Warning 3/3/2006 1:40:23PM SMTPSVC None 4000 N/A jzgwxp
Warning 3/3/2006 1:25:51PM SMTPSVC None 4000 N/A jzgwxp
Warning 3/3/2006 1:12:17PM SMTPSVC None 4000 N/A jzgwxp

I right-clicked on one of them and viewed the properties. This is what
I saw:

Event Type: Warning
Event Source: smtpsvc
Event Category: None
Event ID: 4000
Date: 3/3/2006
Time: 3:02:13 PM
User: N/A
Computer: JZGWXP

Description:
Message delivery to the remote domain 'gmail.com' failed for the
following reason: The remote server did not respond to a connection
attempt.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: d2 02 04 c0 Ò..À

So, it looks like that remote servers do not accept my mail.
 
J

Juan T. Llibre

re:
So, it looks like that remote servers do not accept my mail.
Click to expand...

If you are using 127.0.0.1 as your smtp name,
mail servers will usually reject mail sent from it.

They will also reject mail originating at single-name ( machinename ) sources.

The best thing to do is register a domain name ( it's quite cheap )
and assign it to your fixed IP.

If you don't have a fixed IP, there's services like www.zoneedit.com
which can provide you with a free dns pointer to your domain,
even if you only have a dynamic IP address instead of a fixed IP.

Zoneedit will also give you a free domain MX, so that you can receive
mail addressed to mail.yourdomain.com or yourdomain.com.



Juan T. Llibre, asp.net MVP
aspnetfaq.com : http://www.aspnetfaq.com/
asp.net faq : http://asp.net.do/faq/
foros de asp.net, en español : http://asp.net.do/foros/
===================================
As a follow-up, I did Start>Run>eventvwr.msc, and clicked System.

I got a whole bunch of Warnings from source SMTPSVC like so:

Type Date Time Source Category Event User Computer
Warning 3/3/2006 3:02:13PM SMTPSVC None 4000 N/A jzgwxp
Warning 3/3/2006 1:40:23PM SMTPSVC None 4000 N/A jzgwxp
Warning 3/3/2006 1:25:51PM SMTPSVC None 4000 N/A jzgwxp
Warning 3/3/2006 1:12:17PM SMTPSVC None 4000 N/A jzgwxp

I right-clicked on one of them and viewed the properties. This is what
I saw:

Event Type: Warning
Event Source: smtpsvc
Event Category: None
Event ID: 4000
Date: 3/3/2006
Time: 3:02:13 PM
User: N/A
Computer: JZGWXP

Description:
Message delivery to the remote domain 'gmail.com' failed for the
following reason: The remote server did not respond to a connection
attempt.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: d2 02 04 c0 Ò..À

So, it looks like that remote servers do not accept my mail.
 
G

Gabriel Magaña

The best thing to do is register a domain name ( it's quite cheap )
and assign it to your fixed IP.
Click to expand...

Dont; forget, though that some of the more anal ISPs (ie, AOL), require not
only that the fully-qualified domain name (ie, mail.mydomain.net) map back
to the sending server via NS lookups, but also that the reverse DNS resolve
back to the mail server, which many ISPs refuse to do.
 
A

antonyliu2002

Hi, Juan,

As a matter of fact, I do have a domain name from dnsexit.com.

I tried allowing relay for my own IP, the dynamic one (which changes
once every long while) assigned by my ISP.

And then I would use

SmtpMail.SmtpServer = "70.225.171.219"

But then, I would get the typical "Could not access 'CDO.Message'
object" exception. It looks like that I won't get this exception only
if I use "127.0.0.1".

Not sure how to go about this. It's getting really really frustrating.
 
G

Gabriel Magaña

That's why zoneedit.com and similar dynamic dns services are a life saver.

Yeh, but my point is that they do not do reverse-DNS lookups. For example,
do a nslookup for gmagana.dyndns.org. Then do an nslookup for the IP
returned (the reverse-DNS lookup).... They will not match. ISPs like AOL
require these two to match.
 
J

Juan T. Llibre

re:
As a matter of fact, I do have a domain name from dnsexit.com.
Not sure how to go about this.
Click to expand...

If you have a domain name, you should setup a virtual domain
for the smtp server, and use your domain name as an alias.

You can also, as suggested before, create a virtual domain for your
machinename and map 127.0.0.1, in the hosts file, to your machinename.

For example, I have an smtp virtual domain for asp.net.do
and another virtual domain for my machine's name, and both work fine.

Use the IIS Manager to create your virtual domains for your smtp server.



Juan T. Llibre, asp.net MVP
aspnetfaq.com : http://www.aspnetfaq.com/
asp.net faq : http://asp.net.do/faq/
foros de asp.net, en español : http://asp.net.do/foros/
===================================
Hi, Juan,

As a matter of fact, I do have a domain name from dnsexit.com.

I tried allowing relay for my own IP, the dynamic one (which changes
once every long while) assigned by my ISP.

And then I would use

SmtpMail.SmtpServer = "70.225.171.219"

But then, I would get the typical "Could not access 'CDO.Message'
object" exception. It looks like that I won't get this exception only
if I use "127.0.0.1".

Not sure how to go about this. It's getting really really frustrating.
 
J

Juan T. Llibre

Right. Some ISP's don't delegate reverse DNS.

If they do, zoneedit, and most other dynamic dns services
allow you to configure reverse dns.

I must admit, though, that I've never needed reverse dns services,
and all mail sent via my server's smtp service gets where it should go.



Juan T. Llibre, asp.net MVP
aspnetfaq.com : http://www.aspnetfaq.com/
asp.net faq : http://asp.net.do/faq/
foros de asp.net, en español : http://asp.net.do/foros/
===================================
 
A

antonyliu2002

Hmm, but I really don't know how to setup a virtual domain for my smtp
server. I googled, but could not a good tutorial.
 
J

Juan T. Llibre

It's real simple.

Open the IIS Manager; scroll down to "Default SMTP Server";
click the "+" sign; select "Domains"; right-click "Domains"
and select "New" and then "Domain".

Select "alias", click "Next" and then write in
your domain name in the next dialog.

That's it!




Juan T. Llibre, asp.net MVP
aspnetfaq.com : http://www.aspnetfaq.com/
asp.net faq : http://asp.net.do/faq/
foros de asp.net, en español : http://asp.net.do/foros/
===================================
Hmm, but I really don't know how to setup a virtual domain for my smtp
server. I googled, but could not a good tutorial.
 
A

antonyliu2002

Hi, Juan,

I tried like you instructed, but I still cannot get it to work.

I also have

127.0.0.1 mydoman.com

in the hosts file under system32\drivers\etc\

In the code, I still have to say

SmtpMail.SmtpServer = "127.0.0.1"

If I don't, I get the typical "Cannot access CDO.Message" error.

The event viewer warning message still says that the destination domain
does not respond to a connection attempt from my smtp virtual server.
 
J

Juan T. Llibre

Hi, Antony.

If what you are getting is a "Cannot access CDO.Message" error,
these FAQs have a few suggestions.

http://systemwebmail.com/faq/4.2.3.aspx

http://systemwebmail.com/faq/4.2.4.aspx

http://systemwebmail.com/faq/4.2.5.aspx

http://systemwebmail.com/faq/4.2.6.aspx

http://systemwebmail.com/faq/4.2.7.aspx

http://systemwebmail.com/faq/4.2.8.aspx

http://systemwebmail.com/faq/4.2.9.aspx

http://systemwebmail.com/faq/4.2.10.aspx

They are very specific to the "Cannot access CDO.Message" error.

Try them and let us know how you do.
One of them should turn the trick for you.




Juan T. Llibre, asp.net MVP
aspnetfaq.com : http://www.aspnetfaq.com/
asp.net faq : http://asp.net.do/faq/
foros de asp.net, en español : http://asp.net.do/foros/
===================================
Hi, Juan,

I tried like you instructed, but I still cannot get it to work.

I also have

127.0.0.1 mydoman.com

in the hosts file under system32\drivers\etc\

In the code, I still have to say

SmtpMail.SmtpServer = "127.0.0.1"

If I don't, I get the typical "Cannot access CDO.Message" error.

The event viewer warning message still says that the destination domain
does not respond to a connection attempt from my smtp virtual server.
 
A

antonyliu2002

Hey, Juan,

As a matter of fact, I am still curious about it. But I am only doing
this for fun.

However, I have a few school projects due pretty soon, so I will have
to continue with the annoying SMTP virtual server thing some time
later.

Cheers.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

SmtpClient Problem 4
When MailMessage.BodyFormat = MailFormat.Html, SmtpMail.Send throws exception 4
SMTP send e-mail 1
Send e-mails with a webform 2
SMTP Relay from IIS SMTP Virtual Server 1
smtp error: unable to connect to remote server...No connection could be made because the target mach 2
Send email in Asp.Net 2.0 8
DotNet Interface to IIS? Not working 6

Top