Label for 5 Tab Dividers

[Aurora]

I am trying to create labels for Avery 5 Tab dividers.
I am using their Work Saver labels - 2 columns, 26 rows on
8-1/2 x 11 sheet of paper.

I set the settings per the instructions on the label sheet.
But there is another setting "vertical pitch" (not noted
in the instructions) which is the distance between
labels. There is no distance between these labels, so I
set it to 0.0". But Word keeps changing it to .35" which
screws up the label alignment.

What can I do? I would appreciate any help you can give
me as soon as possible.

Aurora

 

[Suzanne S. Barnhill]

The vertical pitch is not the space between the labels but the space between
the top of one label and the top of the next. In your case, that should be
the same as the height of the label.

I don't have a custom label definition for Worksaver 5, but I do have one
for Worksaver 8, and both the label height and the vertical pitch are set to
0.33".

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

 

[Duke]

try using one of the wizards from this site:

http://www.avery.com/us/Main?action=software.AverySoftwareDetail&catalogcode=WEB01&softwarecode=3201