KVM Switch - 2-port; Dual DVI; USB + Audio

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I am look for a KVM switch with the following characteristics:
2-port
Dual DVI displays
USB mouse (I realize that I could use a USB to PS/2 connector but would
prefer native USB)
USB keyboard
Audio switching (both speaker and mic)
Extra integrated 2 port switching USB hub
Under $300

I do NOT need dual link (1600 X 1200 is more than enough for me).

Most of the kvm switches out there seem to be designed for computers
circa 1999-2000. Surely I cannot be the only person in the known
universe that has purchased 2 computers after 2002 and needs a
up-to-date switch? I am not trying to sound snobby cause at this point
neither of my machines is anywhere close to state-of-the-art, but I
swear that I saw some of the switches that I have recently researched
in that moive "Wargames" from the 80s. Do they even make mice with
PS/2 connections any more? :)

Do you know of a KVM switch that meets my needs (described above)? If
not, what types of software do you typically run and what KVM switch
are you using? And what has been your experience? I am definitely
interested in reliability/performance data. Can you point me to a site
with a comparative review of new KVM switches. Other than a single
model "first look" type article, it looks like Tom's has not done a big
review in about 2 years and it is even longer for AnandTech.

The StarTech SV231UADVI is close but only supports one display.
The StarTech SV221DVIDD has dual display but lacks most the rest.
The NTI KEEMUX-P2V-2 looks like a rebadged but more expensive (?)
StarTech SV221DD (which also will not work).
The Cables to Go C184-32562 also looks like a rebadged (but less
expensive) SV221DD.
The Aten CS1762 is also close but also only supports one DVI display.
The Aten CS1742 is also close but has VGA rather than DVI display (and
I am not sure if it really switches audio).
Belkin does not have anything that fits the bill and I have read
nothing but bad reviews of their switches.
The IOGear GCS1762, like the SV321UADVI and CS1762 is very close but
lacks the dual display support.
Adder does not have anything close in the price range.
The Avocent 2SVDVI10-001 is another possibility but again only supports
one display.
The TrendNet TK-204K, a very low cost alternative, is missing several
needed parts.
The Gefen EXT-DVI-422 is probably the closest match that I have found
but it is grossly overpriced.

Running Windows XP on both machines (although one of them is actually
configured to also run Linux). Monitors are Dell 2005FP and Dell
1905FP. Using an nVidia card in one and an ATI in the other.
Keyboards are Microsoft Natural Keyboard Elite and an old plain IBM
keyboard (not sure if it has a name or model number but this is the one
that I will dump anyway unless the Natural will not work). Mice are
Logitech and a generic cheapie model. Speakers are generic 5.1. Not
sure what brand the mic is. Don't think that it matters but one rig
has an ASUS mainboard and the other is DFI LanParty.

Might also consider a 4-port (if it is not too much more expensive and
meets the requirements above) to get my Thinkpad T42 into the mix.
 
Not everybody uses Google Many technology professionals use a tool
called a NewsReader (Agent is good one and there are many others) to
follow various newsgroups. And, in fact, this was the primary way to
keep up with news before Google as these newsreaders provide a much
more efficient interface to digest large amounts of information. One
of the nice things about newsreaders is that they keep track of which
newsgroups the uswer is interested in and which posts have already been
read. However, don't get me wrong. I think Google is a great tool for
many things and I do appreciate that Google is hosting the newgroup
archive.

Do not be concerned with your misuse of the term "spam." It is a
common mistake for newsgroup users. What I did is called
cross-posting. "Cross-posting" is the term used when a user has a
message that logically fits in more than one category (or news group).
Since I am asking a quesiton that few people will have the correct
answer for (as it involves a fairly unique situation) and since the
folks that may actually have an answer do not all necessarily follow
the same newsgroup, I am maximizing the possibility of getting a
response that actually has some useful information.
 
Not everybody uses Google Many technology professionals use a tool
called a NewsReader (Agent is good one and there are many others) to
follow various newsgroups. And, in fact, this was the primary way to
keep up with news before Google as these newsreaders provide a much
more efficient interface to digest large amounts of information. One
of the nice things about newsreaders is that they keep track of which
newsgroups the uswer is interested in and which posts have already been
read. However, don't get me wrong. I think Google is a great tool for
many things and I do appreciate that Google is hosting the newgroup
archive.
Click to expand...

He may have meant, Google for products, actively seek one
for purchase instead of asking.
Do not be concerned with your misuse of the term "spam." It is a
common mistake for newsgroup users. What I did is called
cross-posting. "Cross-posting" is the term used when a user has a
message that logically fits in more than one category (or news group).
Since I am asking a quesiton that few people will have the correct
answer for (as it involves a fairly unique situation)
Click to expand...

Hold on there, if your desire is so common as you suggested
previously, all the more reason why your excessive
cross-posting is unwarranted.

We are NOT your personal shopper service, and it is
incredibly rude to post to all these groups.

Guess what genius? Everyone using usenet has a keyboard so
every single group would be fit. WRONG. Only the
applicable groups would be, those dealing specfically with
PC peripherals.
and since the
folks that may actually have an answer do not all necessarily follow
the same newsgroup, I am maximizing the possibility of getting a
response that actually has some useful information.
Click to expand...

Nope, you're selfishly misusing usenet.

If every pinhead out there posted to every group that was
only vaguely connected to a topic, there would be no useful
purpose to the individual groups which were expressly set up
to segregate.

The useful information is that you don't need a KVM, you
need to learn the simplest of tasks- use a search engine to
find a common product for purchase. You might even try
using some of the more obvious keywords if you just don't
understand search engines (LOL), like "USB DVI KVM"... takes
about 5 seconds to find tons of hits, 2,910,000 hits to be
exact.
 
.... snip ...

Do not be concerned with your misuse of the term "spam." It is
a common mistake for newsgroup users. What I did is called
cross-posting. "Cross-posting" is the term used when a user has
a message that logically fits in more than one category (or news
group). Since I am asking a quesiton that few people will have
the correct answer for (as it involves a fairly unique
situation) and since the folks that may actually have an answer
do not all necessarily follow the same newsgroup, I am
maximizing the possibility of getting a response that actually
has some useful information.
Click to expand...

However you failed to set follow-ups to the one principle group
that you use. If someone is interested they can follow the thread
there. Meanwhile you have attracted whatever immediate interest
there is. The follow-up prevents developing a monster. When you
fail to do so nobody can resolve the prime newsgroup later.

Your failure there leaves your post firmly in the nuisance category.

--
"If you want to post a followup via groups.google.com, don't use
the broken "Reply" link at the bottom of the article. Click on
"show options" at the top of the article, then click on the
"Reply" at the bottom of the article headers." - Keith Thompson
More details at: <http://cfaj.freeshell.org/google/>
w
 
Back
Top