is the driver written for XP will work 100% on XP embedded?

P

Patrick Zou

especially for the all the USB class drivers, are they needed to be
rewritten?

thanks
pat/
 
B

Brad Combs

Patrick,

In a nutshell, if it works with XP Pro, it will work with XPe. Some drivers
take more work than others to componentize, but they all will work
(eventually). HTH,

Brad Combs
Imago Technologies
 
D

David Reed \(MS\)

Brad is correct. If a driver is compatible with XP Pro,
it should work well in XPe.

I would check to see if the drivers you are adding are
digitally signed. If they are not digitally signed, then
you need to disable the Driver Signing Policy in XPe
before the drivers will install. There is a tool that is
native to Windows called sigverif.exe that you can use to
check for unsigned drivers and files.

David
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Windows XP Embedded Cloning - 2 Partitions Display 0
Driver Difference Between WinXP, XP Embedded and WinCE 2
Can I use XP driver with XPE? 1
Does Windows XP Embedded support all WinXP driver and software ? 2
Minidump Files on windows embedded 4
XP Pro driver on XPe 1
Problem with Windows Embedded Studio SP3 evaluation version 0
Driver support in embedded XP 3

Top