ip$ problems post sp2 install

[Guest]

I have a home network that has the following computer OS's (98SE, NT, 2000,
XP MCE SP2). Since installing SP2, I have been getting an IP$ login prompt
from the 98SE machine. All the machine's have access to the internet and to
each other machine. The only connect I have a problem with is the 98SE to
XP. All other connections in both directions work. Any suggestions or
solutions? I have tried the userid solution and it did not fix it (creating
the same user on both machines).

Thanks

 

[Robert L [MS-MVP]]

quoted from http://www.ChicagoTech.net

Resource: \\computername\IPC$ - An extended error has occurred
Symptoms: When you attempt to connect to w2k/xp computer over the network,
you may receive one of the following error messages: "You must supply a
password to make this connection: Resource: \\computername\IPC$" -or-
"computername An extended error has occurred"
Resolutions: 1. make sure netlogon service is running.
2. Make sure you have created logon ID and password for remote computer
logon.
3. Or enable guest account.
--
For more and other information, go to http://www.ChicagoTech.net


Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
Networking Solutions, http://www.chicagotech.net/networksolutions.htm
VPN Solutions, http://www.chicagotech.net/vpnsolutions.htm
VPN Process and Error Analysis, http://www.chicagotech.net/VPN process.htm
VPN Troubleshooting, http://www.chicagotech.net/vpn.htm
This posting is provided "AS IS" with no warranties.

 

[Carey Holzman]

www.careyholzman.com/net1.htm

Carey