Installed Seagate 200 GB

R

rj

I installed Seagate 200 gb hard drive. It is my new boot drive, old one
failed. I had to install the hard drive with the 137 gb limitation as my
original XP Professionial was pre SP1. I now have everything installed.
Bios recognizes the 200 gb capacity. Now that Windows XP sp 2 is installed
on the new 200 gb drive, how do I get Windows to use the whole 200 gb drive
and not just the 137 gb. Tried to get help from Seagate but their help is
somewhat lacking. Their literature says you can get Windows to recognize the
whole 200 after installation but never tells you how.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Windows Vista and Hard drive recognition. 5
Win2000 "C" Drive only 2.0 GB - How do I increase it? 11
External HDD Drive is not Detected / Driver is not getting install 4
installing Win2000 on 200 GB drive 8
Install of Window XP Ser. Pak 2 will not allow access to 200 GB dr 1
Large file transfers 3
Windows XP Mass Storage Controller Driver for Asus motherboard P4R800-VM motherboard for XP Re-installation 3
Drive Partitioning vs. Updated Bios 12

Top