G
Guest
problem during instalation. error code is [80070241] whats the problem with
instalation?
instalation?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
B
Bob T.
This error most likely pertains to a corrupt iso. If you downloaded try
burning a new disk.
burning a new disk.
R
Rick Rogers
Hi,
In addition, if you downloaded run a CRC utility to check the file both
before burning to disk and then the disk itself. It has been documented as
well that reducing the burn speed to 1x or 2x can alleviate this common
problem.
--
Best of Luck,
Rick Rogers, aka "Nutcase" - Microsoft MVP
Windows help - www.rickrogers.org
In addition, if you downloaded run a CRC utility to check the file both
before burning to disk and then the disk itself. It has been documented as
well that reducing the burn speed to 1x or 2x can alleviate this common
problem.
--
Best of Luck,
Rick Rogers, aka "Nutcase" - Microsoft MVP
Windows help - www.rickrogers.org
Bob T. said:This error most likely pertains to a corrupt iso. If you downloaded try
burning a new disk.
carl said:problem during instalation. error code is [80070241] whats the problem
with
instalation?
C
Colin Barnhorst
Or at least the lowest available speed, which for my burner software was 6X.
The burn speed is by far the likliest problem.
The burn speed is by far the likliest problem.
Rick Rogers said:Hi,
In addition, if you downloaded run a CRC utility to check the file both
before burning to disk and then the disk itself. It has been documented as
well that reducing the burn speed to 1x or 2x can alleviate this common
problem.
--
Best of Luck,
Rick Rogers, aka "Nutcase" - Microsoft MVP
Windows help - www.rickrogers.org
Bob T. said:This error most likely pertains to a corrupt iso. If you downloaded try
burning a new disk.
carl said:problem during instalation. error code is [80070241] whats the problem
with
instalation?
B
Bob T.
That's what I was thinking. Don't touch a thing while burning, leave the
mouse alone, walk away from it.
mouse alone, walk away from it.
Colin Barnhorst said:Or at least the lowest available speed, which for my burner software was
6X. The burn speed is by far the likliest problem.
Rick Rogers said:Hi,
In addition, if you downloaded run a CRC utility to check the file both
before burning to disk and then the disk itself. It has been documented
as well that reducing the burn speed to 1x or 2x can alleviate this
common problem.
--
Best of Luck,
Rick Rogers, aka "Nutcase" - Microsoft MVP
Windows help - www.rickrogers.org
Bob T. said:This error most likely pertains to a corrupt iso. If you downloaded try
burning a new disk.
problem during instalation. error code is [80070241] whats the problem
with
instalation?
C
Colin Barnhorst
I even shut down the virus scanner while its running.
Bob T. said:That's what I was thinking. Don't touch a thing while burning, leave the
mouse alone, walk away from it.
Colin Barnhorst said:Or at least the lowest available speed, which for my burner software was
6X. The burn speed is by far the likliest problem.
Rick Rogers said:Hi,
In addition, if you downloaded run a CRC utility to check the file both
before burning to disk and then the disk itself. It has been documented
as well that reducing the burn speed to 1x or 2x can alleviate this
common problem.
--
Best of Luck,
Rick Rogers, aka "Nutcase" - Microsoft MVP
Windows help - www.rickrogers.org
This error most likely pertains to a corrupt iso. If you downloaded
try burning a new disk.
problem during instalation. error code is [80070241] whats the problem
with
instalation?
M
Mark D. VandenBerg
I do it in a quiet, dark closet.
I even shut down the virus scanner while its running.
I even shut down the virus scanner while its running.
Bob T. said:That's what I was thinking. Don't touch a thing while burning, leave the
mouse alone, walk away from it.
Colin Barnhorst said:Or at least the lowest available speed, which for my burner software was
6X. The burn speed is by far the likliest problem.
Rick Rogers said:Hi,
In addition, if you downloaded run a CRC utility to check the file both
before burning to disk and then the disk itself. It has been documented
as well that reducing the burn speed to 1x or 2x can alleviate this
common problem.
--
Best of Luck,
Rick Rogers, aka "Nutcase" - Microsoft MVP
Windows help - www.rickrogers.org
This error most likely pertains to a corrupt iso. If you downloaded
try burning a new disk.
problem during instalation. error code is [80070241] whats the problem
with
instalation?
C
Colin Barnhorst
Hmmm.....
Mark D. VandenBerg said:I do it in a quiet, dark closet.
I even shut down the virus scanner while its running.
Bob T. said:That's what I was thinking. Don't touch a thing while burning, leave the
mouse alone, walk away from it.
Colin Barnhorst said:Or at least the lowest available speed, which for my burner software was
6X. The burn speed is by far the likliest problem.
Hi,
In addition, if you downloaded run a CRC utility to check the file both
before burning to disk and then the disk itself. It has been documented
as well that reducing the burn speed to 1x or 2x can alleviate this
common problem.
--
Best of Luck,
Rick Rogers, aka "Nutcase" - Microsoft MVP
Windows help - www.rickrogers.org
This error most likely pertains to a corrupt iso. If you downloaded
try burning a new disk.
problem during instalation. error code is [80070241] whats the
problem
with
instalation?
C
Chad Harris
No evidence whatsoever that concomittant activity on the box while burning
has any scintilla of impact on the burn's integrity and you won't get any
burning software company to say it does or produce studies it does. Running
away from lol mice doesn't help but if they frighten you otherwise you could
get a kitty to keep them in check. Colin is super thorough but I can't find
a link to a viral scanner and burning anywhere. Viral scanning and
installing some programs--that association probably happens although not
much. Mark Vanderberg's closet routine is because of a certain zen mood he
wants to evoke while burning.
Much more common causes of probelms burning are far and away using a slow
enough speed but 4X should be plenty, failure to close the session, and less
commonly this may help:
Get to Dev Manager by typing devmgmt.msc in run/win key + pause break or Rt.
click My Computer>Prop>hardware tab>Device Manager if you like 5 steps
instead of one cmd. If you're set to PMI here change to DMO and if set to
DMO change to PMI:
a.. Click the + in front of IDE ATA/ATAPI Controllers
a.. Double Click the Secondary IDE Controller
a.. Click Advanced Settings
a.. Under Device 1 Next to Transfer Mode choose DMA (or vise versa)
a.. Click OK
a.. Reboot your System
CH
has any scintilla of impact on the burn's integrity and you won't get any
burning software company to say it does or produce studies it does. Running
away from lol mice doesn't help but if they frighten you otherwise you could
get a kitty to keep them in check. Colin is super thorough but I can't find
a link to a viral scanner and burning anywhere. Viral scanning and
installing some programs--that association probably happens although not
much. Mark Vanderberg's closet routine is because of a certain zen mood he
wants to evoke while burning.
Much more common causes of probelms burning are far and away using a slow
enough speed but 4X should be plenty, failure to close the session, and less
commonly this may help:
Get to Dev Manager by typing devmgmt.msc in run/win key + pause break or Rt.
click My Computer>Prop>hardware tab>Device Manager if you like 5 steps
instead of one cmd. If you're set to PMI here change to DMO and if set to
DMO change to PMI:
a.. Click the + in front of IDE ATA/ATAPI Controllers
a.. Double Click the Secondary IDE Controller
a.. Click Advanced Settings
a.. Under Device 1 Next to Transfer Mode choose DMA (or vise versa)
a.. Click OK
a.. Reboot your System
CH
Bob T. said:That's what I was thinking. Don't touch a thing while burning, leave the
mouse alone, walk away from it.
Colin Barnhorst said:Or at least the lowest available speed, which for my burner software was
6X. The burn speed is by far the likliest problem.
Rick Rogers said:Hi,
In addition, if you downloaded run a CRC utility to check the file both
before burning to disk and then the disk itself. It has been documented
as well that reducing the burn speed to 1x or 2x can alleviate this
common problem.
--
Best of Luck,
Rick Rogers, aka "Nutcase" - Microsoft MVP
Windows help - www.rickrogers.org
This error most likely pertains to a corrupt iso. If you downloaded
try burning a new disk.
problem during instalation. error code is [80070241] whats the problem
with
instalation?
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.