Incorrect Subnet Mask Assigned

  • Thread starter Thread starter Darrell
  • Start date Start date
D

Darrell

I have users that are connecting remotely via dialup to
TS. When they connect, they are correctly getting
assigned an IP address through DHCP except the Subnet
Mask they are getting assigned is 255.255.255.255 and it
should be 255.255.255.0. From this point, they can go no
further in the network. I've checked all of the TS and
RAS configurations and nothing has changed in the
process. Any thoughts as to what might have caused this
to stop working correctly.

Thank you,
Darrell
 
Try assigning them an address from a static pool of available IP Addresses. I use this instead of giving them IPs from my DHCP pool and it works fine (2000 or 2003)

Patrick Rous
Microsoft MVP - Terminal Serve
http://www.workthin.co

----- Darrell wrote: ----

I have users that are connecting remotely via dialup to
TS. When they connect, they are correctly getting
assigned an IP address through DHCP except the Subnet
Mask they are getting assigned is 255.255.255.255 and it
should be 255.255.255.0. From this point, they can go no
further in the network. I've checked all of the TS and
RAS configurations and nothing has changed in the
process. Any thoughts as to what might have caused this
to stop working correctly

Thank you
Darrel
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Windows XP Need help with subnet routing and using XP as a router 0
PPP RAS Adapter 2
RAS not using correct DHCP server info. Wrong subnet mask and gate 1
How come IPConfig /flushdns doesn't work??.... 6
Subnet Mask problem? 3
Subnet mask for VPN 1
DHCP and single IP Address scopes 2
Vista VPN gets wrong subnet mask 2

Back
Top