Inaccessible Boot Device after installing 2nd RAID controller

[Guest]

Hello

I have a problem with a Windows 2000 Server (SP4). The System is installed on a ICP-Vortex RAID 1 Hostdrive. The System was still runnig. Now I have installed a second RAID controller for SATA Devices. I have created an new Hostdrive and have installed the ICP drivers fpr the new controller. The System seems to be ok. After rebooting I get a blue screen with errormessage Inaccessible_Boot_Device. The second controller bios is disabled

Is there any chance to get the System recovered without having a recovering disk. Is it possible to edit the registry from the recovery console

Thanks for answer

 

[Pegasus \(MVP\)]

Hello,

I have a problem with a Windows 2000 Server (SP4). The System is installed

on a ICP-Vortex RAID 1 Hostdrive. The System was still runnig. Now I have
installed a second RAID controller for SATA Devices. I have created an new
Hostdrive and have installed the ICP drivers fpr the new controller. The
System seems to be ok. After rebooting I get a blue screen with errormessage
Inaccessible_Boot_Device. The second controller bios is disabled.

Is there any chance to get the System recovered without having a

recovering disk. Is it possible to edit the registry from the recovery
console?

Thanks for answer

If you have access to a CD burner, and if you have a WinXP Professional CD
then you can burn a Bart CD (http://www.nu2.nu/pebuilder/#download). When
booting with this CD then you get a basic WinXP environment, with all the
facilities that WinXP Professional gives you, such as the ability to fully
access your RAID disk, or to edit your original registry.