i have 3 cpus sharing an internet connection via a hub what do ineed to do to be able to use i print

[ww]

i have 3 cpus sharing an internet connection via a hub what do i need to do to be able to use i printer in the whole house
plz email (e-mail address removed)

 

[Service Pack]

You need a Print Server. It will plug in to the hub or router. Make sure
you get one with parallel and USB ports so you can plug in either one.

 

[Jim Macklin]

You have three computers (the CPU is just the chip) and to
add a single printer you have two choices...
get a network enabled printer that will plug into the hub or
connect a printer to one of the computers and enable printer
sharing, this will require that computer to be on in order
to print from the other computers.

The best solution would be to buy a router with a print
server built-in.


--
The people think the Constitution protects their rights;
But government sees it as an obstacle to be overcome.


|i have 3 cpus sharing an internet connection via a hub what
do i need to do to be able to use i printer in the whole
house
| plz email (e-mail address removed)

 

[Robert Blackwell]

Go to the control panel of whichever computer the printer is attached to,
double click the printers icon, select your printer from the list (if you
have more than one), right click and choose sharing...

From there check the option to share the printer and give it a name on the
network. On the other computers, you can browse to the host computer via
network neighborhood and see it as a shared resource. Double clicking the
printer will usually install the drivers on each client computer. It will
then be available in the dropdown list of printers whenever you try to print
something.

 

[Frank]

i have 3 cpus sharing an internet connection via a hub what do i need
to do to be able to use i printer in the whole house
plz email (e-mail address removed)

Help and Support > type in add printer--connect to a printer that is
attached to another computer