HP Laserjet IIIP Corona Wire

[Frank Henderson]

Could anyone tell me how to access the corona wire in an HP Laserjet IIIP?
Is it inside the cartridge by any chance? I downloaded what was supposed to
be a IIIP manual, but it doesn't seem to pertain to what I have. I just want
to clean it to try to cut down on a streak up the right side of the paper.

Frank

 

[Frank Henderson]

Excuse me. The LEFT side of the paper.

 

[Don]

I used to have one of those a *long* time ago I don'r remember ever
having to clean the corona wire, although I did have to run the cleaning
cycle periodically. In case you don't have the information on the cleaning
cycle, see the reference below (but watch out for wrap in the URL). If the
streak is a black streak, that sounds more like dirty rollers and other
parts in the paper path. The cleaning cycle prints a "cleaning page" and
then uses that page upside-down, as I recall. I don't know why it worked,
but it did take care of black streaks.

Don


http://h20000.www2.hp.com/bizsuppor...esId=25489&prodTypeId=18972&objectID=bpl06139

I used to have one of those a *long* time ago I don'r remember ever
having to clean the corona wire, although I did have to run the cleaning
cycle periodically

 

[Alan]

Could anyone tell me how to access the corona wire in an HP Laserjet IIIP?
Is it inside the cartridge by any chance? I downloaded what was supposed to
be a IIIP manual, but it doesn't seem to pertain to what I have. I just want
to clean it to try to cut down on a streak up the right side of the paper.

The IIIP doesn't have a corona wire. See
<http://www.printerworks.com/Printers/LaserJet_IIP_IIIP.html>

Where did you find the manual you mention?

 

[Frank Henderson]

www.2manuals.com Thanks for your help, fellows. I had bought this old thing
for our church from a company going out of business and didn't get any
literature with it at all. I've replaced several of the rollers, etc. but
didn't know about the no coronoa wire thing. Thanks again.

 

[fred smith]

sounds more like the toner cartridge try swapping one for your first
even a low one