How to use my web cam

[Guest]

I have a logetich web cam. had it with my old PC and xp when netmeeting was still availabe. Now that netmeeting is gone I don't know how to use my web cam . Any advice would be greatly appreciated. Feel free to email me at (e-mail address removed)

 

[John Ski]

Subject: How to use my web cam

From: "=?Utf-8?B?Q1RDVUs=?=" (e-mail address removed)
Date: 2/1/2004 10:56 PM Eastern Standard Time
Message-id: <[email protected]>

I have a logetich web cam. had it with my old PC and xp when netmeeting was
still availabe. Now that netmeeting is gone I don't know how to use my web
cam . Any advice would be greatly appreciated. Feel free to email me at
(e-mail address removed)

Get MSN Messenger 6.1 from the link on the MSN Website. If you're on a router,
i.e. not directly connected to the Internet, you may find Enat Voice
helpful(you can Google for the Site) I have found that the two together work
quite well for playing with the grandson over broadband.

HTH,
John
"Any sufficiently advanced technology is indistinguishable from magic"
***Arthur C. Clarke***

 

[MikeP]

XP has Netmeeting. Click Start, Run, type conf.exe and press enter.

I have a logetich web cam. had it with my old PC and xp when netmeeting

was still availabe. Now that netmeeting is gone I don't know how to use my
web cam . Any advice would be greatly appreciated. Feel free to email me at
(e-mail address removed)

 

[granny]

1.. Click Start, and then click Run.
2.. In the Open box, type: conf, and then press ENTER.
this will manually enable Netmeerting in WInXP

jeanette

I have a logetich web cam. had it with my old PC and xp when netmeeting

was still availabe. Now that netmeeting is gone I don't know how to use my
web cam . Any advice would be greatly appreciated. Feel free to email me at
(e-mail address removed)

 

[Alex Nichol]

I have a logetich web cam. had it with my old PC and xp when netmeeting was still availabe. Now that netmeeting is gone I don't know how to use my web cam .

Net meeting has not gone. To run it - Start - Run and type in Conf