How to reset the waste ink tank on the Canon S200?

[John van der Elburg]

Hi guys, My Canon S200 printer has stopped doing its work... It says the
waste ink tank is full. For lots of other Canon printers I can find the
procedure to reset the waste ink tank, but not for this S200. Does anyone
know how to do it? I don't want to bring it to the store and pay lots of
money to have this done!

 

[Bil]

Try this, it works for Canon S300 ans S330 (similar to S200)
2. (EEPROM reset)seems to work better
Bil

1. RESET WASTE INK COUNTER Reset the counter if the waste ink level is
50% or
less; else replace the waste ink absorber and reset the counter. 1. Turn the
printer off. 2. While holding down the RESUME button, press the POWER
button. 3. Continuing to hold down on the POWER button, release the RESUME
button. 4. Press the RESUME button twice while the indicator is blinking. 5.
Release the POWER button. 6. Once the indicator has stopped blinking, press
the RESUME button 4 times. 7. Press the POWER button.

2. RESET THE EEPROM The EEPROM must be reset when the logic board or
waste ink
absorber is replaced. 1. Turn the printer off. 2. While holding down the
RESUME button, press the POWER button. 3. Continuing to hold down on the
POWER button, release the RESUME button. 4. Press the RESUME button twice
while the indicator is blinking. 5. Release the POWER button. 6. Once the
indicator has stopped blinking, press the RESUME button 3 times. 7. Press
the POWER button.


John van der Elburg a écrit: