RGW said:
I would like to share a single DSL connection between two Workgroups secure from each other. I currently have a small wired peer workgroup connected to the DSL modem via a Linksys BEFSR41 router. I would like to add a Linksys WAP11 access point to the router to provide internet access to visitors with WiFi capabilities. I do not want the WiFi clients to "see" or otherwise have access to my wired peer group. How would I accomplish this? Thank you ... Ron
Simply adding a wireless access point can't do what you want. All of
the computers would be in the same subnet and would be able to access
each other.
For total isolation between the wired and WiFi clients, add a wireless
router and a wired router. Connect each new router's WAN (Internet)
port to a LAN port of the existing BEFSR41. Connect your current
wired clients to the LAN ports of the new wired router. Connect the
WiFi clients to the new wireless router.
Make sure that the new routers use a different LAN subnet than the
BEFSR41. For example, if it uses 192.168.1.x, use something like
192.168.0.x on the new routers.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)
Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.
Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com