Help with brothers Asus(a7a26 Board. I NEED HELP ASAP a7a266

[zyrott89]

The story is, Me and my brother have computers, I thought my ram wen
bad in mine, so i took the ram outta his computer with the a7a266asu
board, My comp didnt work with it so i swapped it back. But now hi
Computer will not completly boot up, everything spins up but nothin
really turns "on" the monitor sits in the idle position. A beepin
sequence happened 2/3 times also, (Beep..2-3secs.. BEAP BEAP BEAP)
thought it was a ram problem so i bought new, and it did the sam
thing, I need help he has many imp photography pictures on theree

I NEED HELP ASAP! thanks in advanc

 

[no_one]

are you sure that you have properly reseated the ram modules? they need to
snap firmly into place. are you making sure you are grounded before you
touch the ram? touch the bare metal frame of the computer first so that you
don't cause permanent damage from a static charge.

 

[ohaya]

The story is, Me and my brother have computers, I thought my ram went
bad in mine, so i took the ram outta his computer with the a7a266asus
board, My comp didnt work with it so i swapped it back. But now his
Computer will not completly boot up, everything spins up but nothing
really turns "on" the monitor sits in the idle position. A beeping
sequence happened 2/3 times also, (Beep..2-3secs.. BEAP BEAP BEAP) I
thought it was a ram problem so i bought new, and it did the same
thing, I need help he has many imp photography pictures on theree.

I NEED HELP ASAP! thanks in advance

Hi,

Do the beep tones sound like 1 long, then 3 short beeps? If so, it
seems like it's a problem with the video. See:

http://www.bioscentral.com/beepcodes/awardbeep.htm

Per that page, try re-seating the video card:

1) Ground yourself to the case
2) Remove the card
3) Re-insert the card and secure it
4) Test system

Jim