HD error 10 ?

M

Marc Reinig

Where did the error come from? Device Manager?

What OS 98/ME or 2k/XP?

If this was from the device manager, it means the device cannot start. This
is usually the result of bad HW or a bad or incorrect driver.

Marc Reinig
System Solutions
 
M

Marc Reinig

Virtually everything in XP is accessed through a driver. In this case, I
suspect that you have a problem with your Firewire driver stack since it
works with USB.

Marc Reinig
System Solutions
 
K

Karl

How and where do I check that?


Marc Reinig said:
Virtually everything in XP is accessed through a driver. In this case, I
suspect that you have a problem with your Firewire driver stack since it
works with USB.

Marc Reinig
System Solutions
 
M

Marc Reinig

I should have said it is probably a problem with your Firewire driver stack,
Firewire controller or firewire interface on the disk.

Do you have another firewire device you could plug in?

Marc Reinig
System Solutions
 
K

Karl

Yes, the Digital camcorder works fine. if I use even the same FW cable. Same
slot or different slot .

I do not know what a FW driver stack is though. Driver stack for what? The
enclosure or the HD ?
 
M

Marc Reinig

My guess is that your drive has a problem with the firewire interface.

Does the drive work on another computer with Firewire?

Marc Reinig
System Solutions
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top