hayyyyyyyyyyyyyyyye

  • Thread starter Thread starter sellah mostafa
  • Start date Start date
S

sellah mostafa

De: "pcbins" <[email protected]>
Objet: Re: Combo box, list box not showing text
Date: jeudi 6 novembre 2008 20:11

This 945674 fix did not work for me. Is there fix for this fix? I heard you
have to re-install Access 2003, is that the only way?
 
hi, what is your actual problem? Is that the combo box selection is not there
in the drop down listing?

If this is the case, I found that this was the result of installing SP3 but,
applying the workaround for me. see below taken from
http://office-watch.com/kb/?945280

WORKAROUND
Workaround 1
To work around this problem, use one of the following methods, depending on
the cause of the problem.
Method 1
Remove the display format that you set for this field. To do this, follow
these steps.

Note Use this method when the first condition of the "Cause 1" section is
true. 1. Open the table that contains this field in Design view.
2. Locate the field, and then click the General tab.
3. In the Format box on the General tab, delete the format that is set.
4. On the File menu, click Save.
5. On the File menu, click Close.
 
Back
Top