Formatting Windows 2000 Server

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hi Everyone

Just wondering if somebody could just help me out, ive got a windows 2000
server system i need to format, its got 3 scsi drives and im wondering the
best way to wipe them all

I tryed putting in a windows CD and booting from it but it cant find the
hard drives, has anyone else had a problem wiping Windows 2000, if so could
you point me in the right direction

Many Thanks

Phi
 
Hi Phil,

the drives probably can't be found because the correct drivers are not
installed during startup of the Installation CD.
Make sure you press F6 during the initial installation screen (acsii
screen). Press S to specify an additional driver for Harddrive Controllers.
Make sure you have the correct driver on a floppy disk and that it is being
loaded correctly. After this procedure you should be able to "see" the 3 scsi
drives and be able to whipe the info.

You could also enter the Bios of the SCSI Controller. In most cases there is
an option to format the harddisks, but you will still need the previous
mentioned procedure to install the OS.

Good luck and keep us updated!

"Phil Baliey" schreef:
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Windows 11 Windows 11 update 5
WINDOWS 2000 SERVER DOESNT DETECT SCSI DEVICES 2
Re-installing W2K on a laptop 1
Windows 2000 Server 1
windows 2000 server won't boot up 13
Software for windows 2000 1
install windows 2000 overwriting current windows XP 1
Two versions of Windows 2000 on one machine (same partition) 5

Back
Top