Error: The program has exited with code 0 (0x0)

G

Guest

Im having trouble building/running a program which was written under Visual
Studio 2000 & .NET Framework 1.0. Im now using a new installation of .NET
1.1 with Visual Studio 2003, otherwise there have been no changes to the
code. Although there appears to be no build errors, the program terminates
almost as soon as it has begun with the debug message The program '[3276]
HSEC_TMS.exe' has exited with code 0 (0x0). Any ides?! Here is the full
output from the debug window:

'DefaultDomain': Loaded
'c:\windows\microsoft.net\framework\v1.1.4322\mscorlib.dll', No symbols
loaded.
'HSEC_TMS': Loaded 'C:\Temp\HSEC_TMS_MGM\bin\HSEC_TMS.exe', Symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system.windows.forms\1.0.5000.0__b77a5c561934e089\system.windows.forms.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system\1.0.5000.0__b77a5c561934e089\system.dll', No
symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system.drawing\1.0.5000.0__b03f5f7f11d50a3a\system.drawing.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\microsoft.visualbasic\7.0.5000.0__b03f5f7f11d50a3a\microsoft.visualbasic.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system.data\1.0.5000.0__b77a5c561934e089\system.data.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system.xml\1.0.5000.0__b77a5c561934e089\system.xml.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system.enterpriseservices\1.0.5000.0__b03f5f7f11d50a3a\system.enterpriseservices.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system.enterpriseservices\1.0.5000.0__b03f5f7f11d50a3a\system.enterpriseservices.thunk.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded 'c:\temp\hsec_tms_mgm\bin\en\hsec_tms.resources.dll',
No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\accessibility\1.0.5000.0__b03f5f7f11d50a3a\accessibility.dll', No symbols loaded.
The program '[3276] HSEC_TMS.exe' has exited with code 0 (0x0).
 
G

Guest

In response to my earlier post, whilst playing around with the properties I
found the following solved the problem:

Open the solution in Visual Studio and right click the project, then select
properties.

Under Common Properties > Build, there is a section named 'Supported Runtimes'

Click 'Change' to bring up up window where you may select the .NET
frameworks to be supported by the application.

Select Microsoft .NET Framework 1.0 (advanced) and click ok.

This is probably a work-around rather than the ideal solution, but at least
it allows me to run the application for now!
Hope this helps anyone in the same situation!

James
 
G

Guest

I am having the same problem but with a visual c++ project but cannot seem to find the properties box you refer to. can you heklp?

aditi
(e-mail address removed)
Im having trouble building/running a program which was written under Visual
Studio 2000 & .NET Framework 1.0. Im now using a new installation of .NET
1.1 with Visual Studio 2003, otherwise there have been no changes to the
code. Although there appears to be no build errors, the program terminates
almost as soon as it has begun with the debug message The program '[3276]
HSEC_TMS.exe' has exited with code 0 (0x0). Any ides?! Here is the full
output from the debug window:

'DefaultDomain': Loaded
'c:\windows\microsoft.net\framework\v1.1.4322\mscorlib.dll', No symbols
loaded.
'HSEC_TMS': Loaded 'C:\Temp\HSEC_TMS_MGM\bin\HSEC_TMS.exe', Symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system.windows.forms\1.0.5000.0__b77a5c561934e089\system.windows.forms.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system\1.0.5000.0__b77a5c561934e089\system.dll', No
symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system.drawing\1.0.5000.0__b03f5f7f11d50a3a\system.drawing.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\microsoft.visualbasic\7.0.5000.0__b03f5f7f11d50a3a\microsoft.visualbasic.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system.data\1.0.5000.0__b77a5c561934e089\system.data.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system.xml\1.0.5000.0__b77a5c561934e089\system.xml.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system.enterpriseservices\1.0.5000.0__b03f5f7f11d50a3a\system.enterpriseservices.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system.enterpriseservices\1.0.5000.0__b03f5f7f11d50a3a\system.enterpriseservices.thunk.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded 'c:\temp\hsec_tms_mgm\bin\en\hsec_tms.resources.dll',
No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\accessibility\1.0.5000.0__b03f5f7f11d50a3a\accessibility.dll', No symbols loaded.
The program '[3276] HSEC_TMS.exe' has exited with code 0 (0x0).
Click to expand...

User submitted from AEWNET (http://www.aewnet.com/)
 
G

Guest

I am having the same problem but with a visual c++ project but cannot seem to find the properties box you refer to in your solution post. can you heklp?

aditi
(e-mail address removed)
Im having trouble building/running a program which was written under Visual
Studio 2000 & .NET Framework 1.0. Im now using a new installation of .NET
1.1 with Visual Studio 2003, otherwise there have been no changes to the
code. Although there appears to be no build errors, the program terminates
almost as soon as it has begun with the debug message The program '[3276]
HSEC_TMS.exe' has exited with code 0 (0x0). Any ides?! Here is the full
output from the debug window:

'DefaultDomain': Loaded
'c:\windows\microsoft.net\framework\v1.1.4322\mscorlib.dll', No symbols
loaded.
'HSEC_TMS': Loaded 'C:\Temp\HSEC_TMS_MGM\bin\HSEC_TMS.exe', Symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system.windows.forms\1.0.5000.0__b77a5c561934e089\system.windows.forms.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system\1.0.5000.0__b77a5c561934e089\system.dll', No
symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system.drawing\1.0.5000.0__b03f5f7f11d50a3a\system.drawing.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\microsoft.visualbasic\7.0.5000.0__b03f5f7f11d50a3a\microsoft.visualbasic.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system.data\1.0.5000.0__b77a5c561934e089\system.data.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system.xml\1.0.5000.0__b77a5c561934e089\system.xml.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system.enterpriseservices\1.0.5000.0__b03f5f7f11d50a3a\system.enterpriseservices.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\system.enterpriseservices\1.0.5000.0__b03f5f7f11d50a3a\system.enterpriseservices.thunk.dll', No symbols loaded.
'HSEC_TMS.exe': Loaded 'c:\temp\hsec_tms_mgm\bin\en\hsec_tms.resources.dll',
No symbols loaded.
'HSEC_TMS.exe': Loaded
'c:\windows\assembly\gac\accessibility\1.0.5000.0__b03f5f7f11d50a3a\accessibility.dll', No symbols loaded.
The program '[3276] HSEC_TMS.exe' has exited with code 0 (0x0).
Click to expand...

User submitted from AEWNET (http://www.aewnet.com/)
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

"no symbols loaded" 1
How to debug? "No Symbols Have Been Loaded" 2
Cannot debug ASP.Net 3
System.IO.FileNotFoundException: specified module could not be fou 1
Append XML Child Node (Additional problems) 2
MessageBox.Show VB.Net VIsual Studio 2003 1
How to debug? "No Symbols Have Been Loaded" 5
Run-Time Error only in Vista 1

Top