Error Signature?

[Jeff]

When I came home last night,I found this message on my
screen. "The system has recovered from a serious
error",then it said,Error Signature-BCCode:a BCP1
00000000 BCP2 00000002 BCP3 00000000 BCP4:804F51C6
OSVER:5_1_2600 SP: 1_0 Product 256_1,then it said,The
following files will be included in this error report
C:WINDOWS\Minidump\Mini112003-02.dmp C:\DOCUME~1
\Dawn\Locals~1\Temp\WER1.tmp dir001\Sysdata.xml.Should I
be concerned?I restarted the pc and got the same error
announcement,will this happen everytime?Any help is
greatly appreciated! Jeff

 

[purplehaz]

Try this:

Temporarily disabling error reporting:
Right-clock on my computer, select properties, advanced tab, error reporting
button - turn on the "no error reporting" check box and turn off the "but
notify me" option.

Disable Virtual Memory:
Right-click on my computer, select properties, advanced tab, performance
settings, advanced tab, virtual memory "change" button. Note down the
current VM settings (system managed or any customized size. Turn on the "no
paging file" bullet, and press the set tab.

Delete the paging file:
Reboot. Verify that the option reads 0 kb for page file. Use folder
options on control panel or explorer "tools" pulldown menu & go to "view"
tab. Turn off check box to permit viewing of system files. Now explorer on
the root of C drive (or what ever drive letter you page file was set to
use), should show a pagefile.sys entry. Delete this. You will get a warning
message about this being a system file. Since you have disabled virtual
memory, this entry is not being used. Delete it. Go empty the trash bin to
make sure this entry is cleared. Some users don't find a paging file at this
point.

Re-enable Virtual Memory:
Right-click on my computer, select properties, advanced tab, performance
settings, advanced tab, virtual memory "change" button , turn on the
system-managed or customized paging file with the same settings as you noted
down earlier. Be sure to press the set button.

Reboot and verify that the paging file is active. Re-enable error reporting
that was disabled earlier.

Reboot and see if the error message goes away. If it comes back then you
might have some sort of driver or hardware problem.