error on boot

  • Thread starter Thread starter gjs
  • Start date Start date
G

gjs

I am getting an error on boot and cannot boot to hard
disk, floppy or cd, or even go to setup. the error
is 'diskette drive 0 seek failure' what does it mean????
 
Change your boot order in the BIOS. If this is not the case, reverse the
cables to your floppy drive. Good luck!
 
I am getting an error on boot and cannot boot to hard
disk, floppy or cd, or even go to setup. the error
is 'diskette drive 0 seek failure' what does it mean????

It appears that your BIOS is not seeing your hard drive and is trying to
boot from floppy. Go into the BIOS and do an autodetect of your hard drive
(s) to see if they are detected. Then check the boot sequence and test by
putting hard drive first.

Leonard Severt

Windows 2000 Server Setup Team
 
I cant get into the bios to change anything and i cant
boot from floppy or cd. the computer was working and then
wouldnt reboot.??????????
 
I cant change the bios because i cant get into it on boot
up. what do i do, the comp was fine until i rebooted
after updating virus software???????

-----Original Message-----
Change your boot order in the BIOS. If this is not the case, reverse the
cables to your floppy drive. Good luck!

--
All the Best,
Kelly

MS-MVP Win98/XP
[AE-Windows® XP]

Troubleshooting Windows XP
http://www.kellys-korner-xp.com

Utilities for Windows XP
http://www.kellys-korner-xp.com/xp_u.htm#xp_util


I am getting an error on boot and cannot boot to hard
disk, floppy or cd, or even go to setup. the error
is 'diskette drive 0 seek failure' what does it
mean????


.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Back
Top