error "diskette drive 0 seek failler"

G

Guest

I have new dell pc which use one drive Partition c: 160 g
When I try to re manage my hard disk by Partition Magic 8.0
Some thing wrong happened -- first my pc restart and didn't open vista again
and give me this error
" diskette drive 0 seek failler - f1 to Continue - f2 to enter setup "
when I use f1 pc restart again and stop >>>
I reinstall vista and redefine Partitions by vista and working good
but the error still happened
" diskette drive 0 seek failler - f1 to Continue - f2 to enter setup "
when use f1 --- windows vista run good
I need help to remove this message
Some thing else when windows run try to find driver for "ms bus" but can't
find it
Thanks ,
 
R

Rick Rogers

Hi,

First, know that PM8 is not compatible with Vista and should not be used on
any system where Vista is installed.

Second, the problem you are seeing sounds like a BIOS issue. The CMOS
battery may have failed (most likely), or the BIOS is unable to communicate
with the floppy drive controller.

--
Best of Luck,

Rick Rogers, aka "Nutcase" - Microsoft MVP

Windows help - www.rickrogers.org
My thoughts http://rick-mvp.blogspot.com
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top