Designing controls for .NETcf

[Danyel Meyer - dialog-it GmbH]

Hallo Group!

I´m looking for a guide on how to make user controls for the Compact
Framework, including how to make designers therefore.

I´ve read two articles on MSDN on this topic, of wich the one by Chris
Kinsman seems to be written for the old SDE-Beta, and the other one does not
show how to add a designer.

Thanks for your advices

--
Danyel Meyer
-------------------------------------------
dialog-it GmbH
Röllinghäuser Strasse 55a
31061 Alfeld/Leine

Tel +49 (0) 5181 900 814
Fax +49 (0) 5181 900 815
E-Mail (e-mail address removed)

 

[Alberto Silva - Mobile Devices MVP]

Hi,
I would recommend you the ".net compact framework core reference" book

Regards,
Alberto Silva

 

[Chris Tacke, eMVP]

The best way to get it going is to look at some examples. Look at
OpenNETCF.org as well as this article:
http://www.intelliprog.com/articles/index.html

 

[Dan Fergus]

You can also check out "The Definitive Guide to the .NET Compact Framework"
from Apress. One chapter discusses controls in VB while we have an appendix
hat walks you through how to create a run-time and a design time control
using C#.

http://www.apress.com/book/bookDisplay.html?bID=151

Dan Fergus
embedded MVP

 

[Danyel Meyer - dialog-it GmbH]

Thanks very much. Both mentioned books have already been ordered, but it
seems like it takes some time to get them in germany...

I´ve read the article from Intelliprog, but it seems to be about the SDE
beta. The example there did not work with VS2003.

Any further help would be nice


--
Danyel Meyer
-------------------------------------------
dialog-it GmbH
Röllinghäuser Strasse 55a
31061 Alfeld/Leine

Tel +49 (0) 5181 900 814
Fax +49 (0) 5181 900 815
E-Mail (e-mail address removed)