dcdiag & frssysvol

G

Guest

I am getting ready to upgrade my w2k dc holding the fsmo role to a w2k3. I
ran the dcdiag to ensure that every test pass before I preform the upgrade.
I have already ran the forestprep/domainprep from the w2k3 CD and it
replicated. When I ran the dcdiag, everything passed except the FRSSYSVOL.
The result of that test is:"Error:No record of File Replication System,
Sysvol started. The active directory may ne prevented from starting."
However, we have not had a report of any network issue and all network
administrative function works in AD. I made sure that the DC have the
NETLOGON and SYSVOL active and there are no DNS issue. How can I
troubleshoot this issue? Everything else passed when I ran dcdiag.
 
P

Paul Bergson

You need replication working. You shouldn't attempt to move forward with
any errors. Your gpo's reside in sysvol for example

--


Paul Bergson MCT, MCSE, MCSA, CNE, CNA, CCA

This posting is provided "AS IS" with no warranties, and confers no rights.
 
G

Guest

Although it states that their is an error, at the end it tells me that the
server pass so I am confused.
Starting test: frssysvol
Error: No record of File Replication System, SYSVOL started.
The Active Directory may be prevented from starting.
......................... PWDC-ADC passed test frssysvol
 
P

Paul Bergson

Is this the only dc? If so then you would have nothing to replicate too.

--


Paul Bergson MCT, MCSE, MCSA, CNE, CNA, CCA

This posting is provided "AS IS" with no warranties, and confers no rights.
 
G

Guest

I have another DC which is also a GC so the PDC needs to replicate to this
DC. Futhermore, I just ran the FRSDIAG and its coming up with:
Found 6 ERROR_ACCESS_DENIED error(s)! Latest ones (up to 3) listed above
Found 3 RPC_S_CALL_FAILED_DNE error(s)! Latest ones (up to 3) listed
All the error are in the, "Checking for errors in debug logs"
 
P

Paul Bergson

Did you try the non-authoritative restore?

--


Paul Bergson MCT, MCSE, MCSA, CNE, CNA, CCA

This posting is provided "AS IS" with no warranties, and confers no rights.
 
P

Paul Bergson

I'm unclear on what to do. Are you sure the errors aren't from previous
tests? I will see what else I can find.

--


Paul Bergson MCT, MCSE, MCSA, CNE, CNA, CCA

This posting is provided "AS IS" with no warranties, and confers no rights.
 
G

Guest

After multiple reboot of the two DCs, the error for the frssysvol clear and
it passed. Don't know why it took so many reboots but now the error no
longer there when I run dcdiag. However, when I run frsdiag, I get some
errrors:

"Checking for errors in debug logs" section.
Checking for errors in debug logs ...
ERROR on NtFrs_0004.log : "ERROR_ACCESS_DENIED" : <SndCsMain:
1752: 895: S0: 11:14:47> :SR: Cmd 00237b08, CxtG 1554902d, WS
ERROR_ACCESS_DENIED, To BDC.DOMAIN.ORG Len: (372) [SndFail - Send Penalty]
ERROR on NtFrs_0004.log : "ERROR_ACCESS_DENIED" : <SndCsMain:
1916: 868: S0: 11:14:48> :SR: Cmd 015aacf8, CxtG a33e08e3, WS
ERROR_ACCESS_DENIED, To BDC.DOMAIN.ORG Len: (506) [SndFail - rpc call]
ERROR on NtFrs_0004.log : "ERROR_ACCESS_DENIED" : <SndCsMain:
1916: 895: S0: 11:14:48> :SR: Cmd 015aacf8, CxtG a33e08e3, WS
ERROR_ACCESS_DENIED, To BDC.DOMAIN.ORG Len: (506) [SndFail - Send Penalty]
ERROR on NtFrs_0001.log : "RPC_S_CALL_FAILED_DNE(Indicates RPC Session was
established to target, but there was a failure to send RPC call package.
Check for Networking problems!)" : <SndCsMain: 2916:
874: S0: 16:14:12> ++ ERROR - EXCEPTION (000006bf) : WStatus:
RPC_S_CALL_FAILED_DNE
ERROR on NtFrs_0001.log : "RPC_S_CALL_FAILED_DNE(Indicates RPC Session was
established to target, but there was a failure to send RPC call package.
Check for Networking problems!)" : <SndCsMain: 2916:
875: S0: 16:14:12> :SR: Cmd 01593f20, CxtG 1554902d, WS
RPC_S_CALL_FAILED_DNE, To BDC.DOMAIN.ORG Len: (372) [SndFail - rpc
exception]
ERROR on NtFrs_0001.log : "RPC_S_CALL_FAILED_DNE(Indicates RPC Session was
established to target, but there was a failure to send RPC call package.
Check for Networking problems!)" : <SndCsMain: 2916:
895: S0: 16:14:12> :SR: Cmd 01593f20, CxtG 1554902d, WS
RPC_S_CALL_FAILED_DNE, To BDC.DOMAIN.ORG Len: (372) [SndFail - Send
Penalty]

Found 6 ERROR_ACCESS_DENIED error(s)! Latest ones (up to 3) listed above
Found 3 RPC_S_CALL_FAILED_DNE error(s)! Latest ones (up to 3) listed above
 
P

Paul Bergson

I haven't used this tool but looking at the errors shows me that some of the
listed errors are hours apart. Try running repladmin and see what that
says.

repadmin.exe /showrepl dc* /verbose /all /intersite > c:\repl.txt
start c:\repl.txt


--


Paul Bergson MCT, MCSE, MCSA, CNE, CNA, CCA

This posting is provided "AS IS" with no warranties, and confers no rights.


manoa said:
After multiple reboot of the two DCs, the error for the frssysvol clear and
it passed. Don't know why it took so many reboots but now the error no
longer there when I run dcdiag. However, when I run frsdiag, I get some
errrors:

"Checking for errors in debug logs" section.
Checking for errors in debug logs ...
ERROR on NtFrs_0004.log : "ERROR_ACCESS_DENIED" : <SndCsMain:
1752: 895: S0: 11:14:47> :SR: Cmd 00237b08, CxtG 1554902d, WS
ERROR_ACCESS_DENIED, To BDC.DOMAIN.ORG Len: (372) [SndFail - Send Penalty]
ERROR on NtFrs_0004.log : "ERROR_ACCESS_DENIED" : <SndCsMain:
1916: 868: S0: 11:14:48> :SR: Cmd 015aacf8, CxtG a33e08e3, WS
ERROR_ACCESS_DENIED, To BDC.DOMAIN.ORG Len: (506) [SndFail - rpc call]
ERROR on NtFrs_0004.log : "ERROR_ACCESS_DENIED" : <SndCsMain:
1916: 895: S0: 11:14:48> :SR: Cmd 015aacf8, CxtG a33e08e3, WS
ERROR_ACCESS_DENIED, To BDC.DOMAIN.ORG Len: (506) [SndFail - Send Penalty]
ERROR on NtFrs_0001.log : "RPC_S_CALL_FAILED_DNE(Indicates RPC Session was
established to target, but there was a failure to send RPC call package.
Check for Networking problems!)" : <SndCsMain: 2916:
874: S0: 16:14:12> ++ ERROR - EXCEPTION (000006bf) : WStatus:
RPC_S_CALL_FAILED_DNE
ERROR on NtFrs_0001.log : "RPC_S_CALL_FAILED_DNE(Indicates RPC Session was
established to target, but there was a failure to send RPC call package.
Check for Networking problems!)" : <SndCsMain: 2916:
875: S0: 16:14:12> :SR: Cmd 01593f20, CxtG 1554902d, WS
RPC_S_CALL_FAILED_DNE, To BDC.DOMAIN.ORG Len: (372) [SndFail - rpc
exception]
ERROR on NtFrs_0001.log : "RPC_S_CALL_FAILED_DNE(Indicates RPC Session was
established to target, but there was a failure to send RPC call package.
Check for Networking problems!)" : <SndCsMain: 2916:
895: S0: 16:14:12> :SR: Cmd 01593f20, CxtG 1554902d, WS
RPC_S_CALL_FAILED_DNE, To BDC.DOMAIN.ORG Len: (372) [SndFail - Send
Penalty]

Found 6 ERROR_ACCESS_DENIED error(s)! Latest ones (up to 3) listed above
Found 3 RPC_S_CALL_FAILED_DNE error(s)! Latest ones (up to 3) listed above

Paul Bergson said:
I'm unclear on what to do. Are you sure the errors aren't from previous
tests? I will see what else I can find.

--


Paul Bergson MCT, MCSE, MCSA, CNE, CNA, CCA

This posting is provided "AS IS" with no warranties, and confers no rights.


to
this me
that confers
no fsmo
role w2k3
CD and
all the
DC I
ran
Click to expand...
Click to expand...
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

DCDIAG: Server01 failed test frssysvol 1
dcdiag errors 29
Dcdiag error "There are errors after SYSVOL has been shared" 3
dcdiag er 5
dcpromo still not fixing netlogon errors 16
DCDIAG tests failed 7
dcdiag showing errors 1
Sysvol/Netlogon problems 1

Top