Creating bootable USB CD

[Michells]

Hello all,

I am facing a problem in creating a bootable USB CD.

wt I did:

1) Inserted Floppy drive and formated it.
2) With boot98se.exe added files in Floppy drive.
3) Edited Config.sys and Autoexec.bat files

[config.sys]
device=a:\himem.sys
devicehigh=a:\emm386.exe
device=a:\usbaspi.sys
dos=high,umb

[autoexec.bat]
@echo off
duseldr a:\duse.exe
MSCDEX /D:USBCDROM /S /M:15 /V

Ghost.exe is also added in that floppy

wt exactly happening is when I boot from floppy with USB CD rom
connected it is able to detect USB host controller and also loading
Ghost.exe but the problem is it is not able to detect the CD Rom .

The problem may be with the USB driver. IS there a USB driver which
detects USB CD ROM (for all models)

Regards
Michells

 

[Larry(LJL269)]

These guys may be of some help.
http://www.911cd.net/forums//index.php?showforum=2

HTH-Larry

On 28 Feb 2007 05:38:02 -0800, "Michells"

|Hello all,
|
|I am facing a problem in creating a bootable USB CD.
|
|wt I did:
|
|1) Inserted Floppy drive and formated it.
|2) With boot98se.exe added files in Floppy drive.
|3) Edited Config.sys and Autoexec.bat files
|
|[config.sys]
|device=a:\himem.sys
|devicehigh=a:\emm386.exe
|device=a:\usbaspi.sys
|dos=high,umb
|
|[autoexec.bat]
|@echo off
|duseldr a:\duse.exe
|MSCDEX /D:USBCDROM /S /M:15 /V
|
|Ghost.exe is also added in that floppy
|
|wt exactly happening is when I boot from floppy with USB CD rom
|connected it is able to detect USB host controller and also loading
|Ghost.exe but the problem is it is not able to detect the CD Rom .
|
|The problem may be with the USB driver. IS there a USB driver which
|detects USB CD ROM (for all models)
|
|Regards
|Michells

Any advise is my attempt to contribute more than I have received but I can only assure you that it works on my PC. GOOD LUCK.

 

[Galen Somerville]

These guys may be of some help.
http://www.911cd.net/forums//index.php?showforum=2

HTH-Larry

On 28 Feb 2007 05:38:02 -0800, "Michells"

|Hello all,
|
|I am facing a problem in creating a bootable USB CD.
|
|wt I did:
|
|1) Inserted Floppy drive and formated it.
|2) With boot98se.exe added files in Floppy drive.
|3) Edited Config.sys and Autoexec.bat files
|
|[config.sys]
|device=a:\himem.sys
|devicehigh=a:\emm386.exe
|device=a:\usbaspi.sys
|dos=high,umb
|
|[autoexec.bat]
|@echo off
|duseldr a:\duse.exe
|MSCDEX /D:USBCDROM /S /M:15 /V
|
|Ghost.exe is also added in that floppy
|
|wt exactly happening is when I boot from floppy with USB CD rom
|connected it is able to detect USB host controller and also loading
|Ghost.exe but the problem is it is not able to detect the CD Rom .
|
|The problem may be with the USB driver. IS there a USB driver which
|detects USB CD ROM (for all models)
|
|Regards
|Michells

Any advise is my attempt to contribute more than I have received but I can
only assure you that it works on my PC. GOOD LUCK.

I'm not on my system that has Ghost but, as I remember, you use a Ghost
utility to create a floppy with the USB detection stuff on it.

That is, you don't make a floppy then add Ghost.

Galen

 

[Michells]

hello,

I tried different methods and finally arrived at this point.

now when I boot from floppy with USB CD drive connected following
message was displaying.

mesage:

USB CD detected

loading Ghost...

CDR 103 Error: Not of High Sierra Format or ISO 9960 Format


so tell me what may be the cause for this and help me out with a
solution.

regards
Michells