Copy image to tabs

[Guest]

I'm having a problem copying an image embedded on a template into a second
workbook. The image "Picture 1" is on a template called "Test.xlt". It is
copied to a tab called "Blank" in the main workbook and then onto all
subsequent tabs.

The first part of the following code works - copying the image from the
template to blank and repositioning the image. The problem occurs after
copying the image from Blank to the next tab. Each tab is activated in order
and unprotected prior to this call:

If ActiveSheet.Name = "Blank" Then
' This all works
Workbooks.Open FileName:="Test.xlt"
ActiveSheet.Shapes("Picture 1").Select
Selection.Copy
ActiveWindow.Close
Sheets("Blank").Activate
ActiveSheet.Unprotect
ActiveSheet.Paste
Else
' It appears that I can copy "Picture 1"
Sheets("Blank").Unprotect
Sheets("Blank").Shapes("Picture 1").Select
Selection.Copy
' Paste to current tab appears to work
ActiveSheet.Paste
End If
** Problems occur here on second pass**
Selection.ShapeRange.Top = 29.25
Selection.ShapeRange.Left = 323.25
Selection.ShapeRange.Height = 44.25
Selection.ShapeRange.LockAspectRatio = msoTrue

Any suggestions ?

 

[Guest]

You should be getting an error here:
Sheets("Blank").Shapes("Picture 1").Select

that code doesn't execute unless Blank is not the activesheet. You can't
select the Picture unless Blank is the activesheet. So I believe you
misinterpret where the error occurs.

If ActiveSheet.Name = "Blank" Then
' This all works
Workbooks.Open FileName:="Test.xlt"
ActiveSheet.Shapes("Picture 1").Select
Selection.Copy
ActiveWindow.Close
Sheets("Blank").Activate
ActiveSheet.Unprotect
ActiveSheet.Paste
Else
' It appears that I can copy "Picture 1"
Sheets("Blank").Unprotect
Sheets("Blank").Shapes("Picture 1").Copy
' Paste to current tab appears to work
ActiveSheet.Paste
End If
** Problems occur here on second pass**
Selection.ShapeRange.Top = 29.25
Selection.ShapeRange.Left = 323.25
Selection.ShapeRange.Height = 44.25
Selection.ShapeRange.LockAspectRatio = msoTrue

 

[Guest]

I got the code to work by adding a select here in the code

Sheets("Blank").Select
Sheets("Blank").Unprotect
Sheets("Blank").Shapes("Picture 1").Select

It wasn't pasting the picture on my sheet two until I added the select.
Then it did not give an error until the picture was moved.

 

[Guest]

Since Joel raised some doubt, I tested the code. The code I posted works
fine for me without further modification.