Can't install new USB device

[Flame]

I have a Toshiba Tecra with Win XP Professional and SP3. It seems that after
installing SP3 it is not possible to install any new USB devices. The devices
that I previously installed work OK, but if I plug them into another USP port
they do not work.

If I insert a new USB device, I get the usual screen asking whether the
installation should be automatic or to select the source for the driver. If I
use the automatic option, after a while a screen comes up with an error
message and in the hardware Manager there is an error "code 1".

Any ideas on how I can fix this problem?

 

[DL]

I think I would visit Tosh web site and see what driver updates were
available for your specific model, specifically chipset

 

[Rich Barry]

What is the USB Device you are trying to install? You could try going
back into Device Manager>USB Controllers>rt click on each one and select
Uninstall. Disconnect any USB
Devices before you do this. Then restart and let WinXP reinstall the
Controllers. You will find more info below
http://support.microsoft.com/kb/310123

http://www.usbman.com/WinME USB Guide.htm