Can't Browse from RRAS

  • Thread starter Thread starter Jordan
  • Start date Start date
J

Jordan

I have setup a W2K advanced server with 2 nics and setup RRAS. VPN clients
seem to be able to access then network fine so both NICs must be working,
but for some reason the RRAS server cannot browse the Internet. I also
installed DNS and WINS services on this computer if that is of any concern.

I don't really need to browse from this server so if it is completely locked
down for everything except for RRAS that is OK, but I would like to know
why.
 
How did you configure the server? Did you use the "VPN Server" option in
the setup wizard?

If you did, the wizard installs packet filters to block all traffic
except VPN traffic.
 
Actually I did use the wizard, but when I went to the TCP/IP properties for
the external nic I did not see anything listed in the IP filtering. Enable
IP filtering is not checked. Where can I see what is filtered and change
the filters?
 
Actually, I found the setup, but not sure hot to allow web traffic. What
are the filters I should add?
 
I have one problem I installed RAS dial-in through modem on W2K server and it connects and gets all the IPs it should WINS, DNS and so on but when I want to browse for other computers on my network I cant there is nothing in My Network Places the only thing I can do is to connecto to WINXP computers and that is when I use IP address not the name. I can ping all the computers but nothing accepte that. So any help would be welcome?
 
I had a similar problem before with Win98 PCs connecting to my RRAS server.
I changed my settings in the DHCP server to issue the WINS server address on
the local network and I also had a change to the Node Type settings. I
believe the WINS setting is number 0x042 and you put in the WINS IP address
and I believe the Node type setting on the DHCP scope is 0x046 and the node
type is 0x08.




John said:
I have one problem I installed RAS dial-in through modem on W2K server and
it connects and gets all the IPs it should WINS, DNS and so on but when I
want to browse for other computers on my network I cant there is nothing in
My Network Places the only thing I can do is to connecto to WINXP computers
and that is when I use IP address not the name. I can ping all the computers
but nothing accepte that. So any help would be welcome?
 
Back
Top