P
PG
Here is a rundown on what I have done.
Motherboard on old Windows Me computer went bad.
Computer would not boot
Decided to just buy a new computer
I need to get files off old Windows Me hard drive
Take Windows Me hard drive out
Set Jumper on hard drive is set as a slave
Connect old windows ME hard drive to new computer running
XP Home Edition
Start up computer
Detects new hardware
Hard drive does not show up in Explorer
Go to Settings=>Control Panel=>Administrative
Tools=>Computer Management
Storage=>Disk Management
Under the Disk Management the hard drive shows up as 2
partitions
Here are values for the 2 partitions:
Volume= Blank
Layout= Partition
Type= Basic
File System= FAT32
Status= Healthy(Active)
Capacity= 38.27GB
Free Space= 25.84GB
% Free= 67%
Fault Tolerance=No
Overhead= 0%
Volume= Blank
Layout= Partition
Type= Basic
File System= NTFS
Status= Healthy(EISA Configuration)
Capacity= 6.01GB
Free Space= 2.09GB
% Free= 34%
Fault Tolerance=No
Overhead= 0%
Only option when I right click on the partition to add
is "Delete Partition"
Any ideas on what I am doing wrong or what I need to do
to see this old hard drive?
Motherboard on old Windows Me computer went bad.
Computer would not boot
Decided to just buy a new computer
I need to get files off old Windows Me hard drive
Take Windows Me hard drive out
Set Jumper on hard drive is set as a slave
Connect old windows ME hard drive to new computer running
XP Home Edition
Start up computer
Detects new hardware
Hard drive does not show up in Explorer
Go to Settings=>Control Panel=>Administrative
Tools=>Computer Management
Storage=>Disk Management
Under the Disk Management the hard drive shows up as 2
partitions
Here are values for the 2 partitions:
Volume= Blank
Layout= Partition
Type= Basic
File System= FAT32
Status= Healthy(Active)
Capacity= 38.27GB
Free Space= 25.84GB
% Free= 67%
Fault Tolerance=No
Overhead= 0%
Volume= Blank
Layout= Partition
Type= Basic
File System= NTFS
Status= Healthy(EISA Configuration)
Capacity= 6.01GB
Free Space= 2.09GB
% Free= 34%
Fault Tolerance=No
Overhead= 0%
Only option when I right click on the partition to add
is "Delete Partition"
Any ideas on what I am doing wrong or what I need to do
to see this old hard drive?