Can't access entire network through VPN

[Guest]

I setup RRAS on my Windows 2000 Server. I configured our D-LINK Router to
allow PPTP_GRE traffic through Port 1723 to the IP address of the server.

I can log in fine through VPN into our network. The problem is that when i
browse the network, i only see the VPN Server and nothing else. Is there a
way i can configure the RRAS Server so that i can have access to the entire
network rather than just the server??

Thanks,
Greg

 

[Robert L [MS-MVP]]

have you enabled the ip routing?

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
Networking Solutions, http://www.chicagotech.net/networksolutions.htm
VPN Solutions, http://www.chicagotech.net/vpnsolutions.htm
VPN Process and Error Analysis, http://www.chicagotech.net/VPN process.htm
VPN Troubleshooting, http://www.chicagotech.net/vpn.htm
This posting is provided "AS IS" with no warranties.

 

[Guest]

IP Routing is enabled

have you enabled the ip routing?

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
Networking Solutions, http://www.chicagotech.net/networksolutions.htm
VPN Solutions, http://www.chicagotech.net/vpnsolutions.htm
VPN Process and Error Analysis, http://www.chicagotech.net/VPN process.htm
VPN Troubleshooting, http://www.chicagotech.net/vpn.htm
This posting is provided "AS IS" with no warranties.

 

[Bill Grant]

Browsing can be tricky over a WAN link. Can you see shares on other
machines using net view \\machinename ? If you can, you can share files
using net use \\machinename\filename .

If you cannot see machines using net view, it is probably a name
resolution problem.